Having problems with message search?
Dave,
That is going to be a NICE LOOKING 450 when your done. You'll find that hondaparts-direct.com is better than bikebandit because the schematics come up faster and they usually have more parts than bikebandit and they are cheaper than bikebandit.
The only problem is if they don't have the part in stock anymore you won't find out till you get your order. If you look the part up on bikebandit and they don't have it, the area will be grayed out so you know not to order it. But, like I said hondaparts-direct.com has more parts.
I rebuilt a $120 CB350F, and building a S90 and CT90 from scratch. I ran into some good friends out there who helped me with the carbs and sent pictures of their bikes so I knew what the original bike should end up looking like when I am done.
Take care,
Dan
----- Original Message -----From: David VisseSent: Sunday, January 04, 2009 11:00 PMSubject: Re: [Vintage Honda Motorcycles] 72 CB450 Brake pivot rod
Wow Dan. Thanks! Another reason to love the internet! See, I had not found this site yet, and I would have passed over "pipe" looking for a pivot rod. Thanks for the help! when I get this thing back together, I'll get some pics posted. Dave
From: Dan Scott <dans0110@gmail.com >
To: vintagehondamotorcycles@yahoogroups .com
Sent: Sunday, January 4, 2009 3:28:11 PM
Subject: Re: [Vintage Honda Motorcycles] 72 CB450 Brake pivot rod
Hi David,Here is what it cost to buy the pivot rod...72 CB450K5$7.82
50526-457-710 (replaces 50526-292-000)
50526-457-710 001 $7.82Can be found at http://www.hondapar ts-direct. com/fiche_ section_detail. asp?category= Motorcycles&make=Honda&year=1972&fveh=2927The 74 CB360 and CB360G don't look like they have the same pivot rod shaft but you can take a look at the pictures for yourself.Dan----- Original Message -----From: David VisseSent: Sunday, January 04, 2009 5:31 PMSubject: Re: [Vintage Honda Motorcycles] 72 CB450 Brake pivot rod
Hi JR, I took a picture of the pivot rod I cut. It measures 3/4" x 6-3/4" (may be off by an 1/8" or so), This rod goes through the brake pedal and then through the center stand. I am not positive if it's the same one or not.dv
From: JoAnn Monroe <trailtwister2003@ yahoo.com>
To: vintagehondamotorcy cles@yahoogroups .com
Sent: Sunday, January 4, 2009 1:19:50 PM
Subject: Re: [Vintage Honda Motorcycles] 72 CB450 Brake pivot rod
I have a 1974 CB360 parts bike. Did they have the same pivot rod?
Thanks! very much! JR
--- On Fri, 1/2/09, Denny "Smitty' Schmidt <smitty56401@ charter.net> wrote:
From: Denny "Smitty' Schmidt <smitty56401@ charter.net>
Subject: Re: [Vintage Honda Motorcycles] 72 CB450 Brake pivot rod
To: vintagehondamotorcy cles@yahoogroups .com
Date: Friday, January 2, 2009, 12:51 PM
Dave... it got above zero today and I had a chance to go through my old parts. I'm sorry if I pumped up your hopes but as it turns out I was mistaken. I must have given most of my Honda parts away when I sold my last old Honda year ago. I had 5 bikes and my wife said I need more room in the garage. I'm down to two now. I have a handle bar clamp assembly with lights for a CB750 and a few Yamaha Seca parts and that's it. Sorry.Smitty----- Original Message -----From: DavevisseSent: Thursday, January 01, 2009 1:33 PMSubject: Re: [Vintage Honda Motorcycles] 72 CB450 Brake pivot rodHappy new year Smitty. Thanks and I'll email you the dimensions
Sent from my iPhoneI might have one from another model. Do you have the dimensions? A lot of
them were alike.
Smitty
----- Original Message -----
From: "davevisse" <davevisse@yahoo. com>
To: <vintagehondamotorcy cles@yahoogroups .com>
Sent: Monday, December 29, 2008 9:50 PM
Subject: [Vintage Honda Motorcycles] 72 CB450 Brake pivot rod
> Hello, new to the group. I'm restoring a 72 cb450 and had to cut my
> brake pivot rod as I stripped the bike down to the frame. I am having
> a heck of time locating one. Any of you have one out there?
>
>
> ------------ --------- --------- ------
>
> Yahoo! Groups Links
>
>
>
------------ --------- --------- --------- --------- --------- -
No virus found in this incoming message.
Checked by AVG - http://www.avg. com
Version: 8.0.176 / Virus Database: 270.10.1/1869 - Release Date: 12/30/2008
12:06 PM
No virus found in this incoming message.
Checked by AVG - http://www.avg. com
Version: 8.0.176 / Virus Database: 270.10.2/1871 - Release Date: 1/1/2009 5:01 PM
Offline 
Send Email