Hi,, Thanks to all who replayed to my question. Yes I fitted a steel
spacer (30 mm about) and two backelite gasket between the barrel and
carb. I wish to know something more about fualty condenser (how to
fit, where to buy... some photos)
thanks
man_40

--- In viking27_is@yahoogroups.com, "mbilamdjian" <mbilamdjian@...>
wrote:
>
> Hi man_40!
>
> Have you fitted a spacer between the carb and the cylinder?
> If you sport a 276 AMAL, when the engine gets very hot the
petrol/air
> mixture evaporates before reaching the combustion chamber. A 1/4"
> thick heat isulating spacer will do the job.
> But if your bikes stops suddenly when it gets hot, and you can't
> restart it until she cools down, you may have a fualty condenser in
> your mag. This last one happened to me. After a short run the
engine
> shuts down and when it gets cooler (to be true the mag not the
> engine), will start first kick again.
>
> Good luck and cheers!
>
> Matías.
>
>
>
> --- In viking27_is@yahoogroups.com, "man_40it" <ascenzo.p@> wrote:
> >
> > Hello,
> > Running Bsa wm20, the engine become very hot and if stopped,
don't
> > restart before to be almost cool. The engine clearance and set
up seem
> > to be tuned.
> > Any suggestion?
> > thanks
> > man_40
> >
>