With regards to the stator, there shouldn't be a designation of large or small taper. The only thing effected by the taper is the flywheel. There aren't large...
Guys...I am fitting new floor strips to a primmy 125, I have odd sized outer ones..Is this right or have I been sold duff parts? I would have thought there...
I think this is correct. if you look at the shape of the floorboards at the back you will see that they are different to give clearance for the kick start...
Jonathan, You shouldn,t have any problem with the early headset and gearchanger to use a 4 speed engine. the 3 speed and the 4 speed engine have the same...
that is correct. the outer right floor strip is shorter than the left outer...makes room for the kickstart lever. you'll notice that the floorboard on the...
Hey I just wanted to tell you about a great company I found! I applyed for a lower mortgage rate and i only had to fill in a simple form. This month alone I...
Yeah, aluminum tennis balls on the lathe. There's an idea. Thanks Francois. I gotta check this list more often. Hey, you know you'll get another smallframe....
What difference would I see if I went from, say, a 24mm Del to a 24mm Mukuni carb? Presumably at idle and at wide open they would offer the same power...
The Mikuni is a flat slide and the Dell is a round slide. Flat slide carbs flow more air and give better fuel atomization. So, yes, at idle they are pretty...
All I wanted was a scooter to get around Stuttgart !! I lived in Naples with the navy for about 10 years, and when I was ordered back to europe three years ago...
Hi all, Just about to bolt on my front hub and shocker on my 1978 Primmy. I've lost my diy drawing of how the spacers were set out etc. Can anyone help out...
I found that the Mikuni was easier to set up for my bike with more redily available jets, etc. I had some funky midrange spots with my delorto that I didn't...
dunno much about the 24mm dell, but the mikuni is a better design, what with the flat slide and 4 distinct circuits...easier to dial in, but like john said, it...
go to www.scooterhelp.com and find the parts book for your bike. then donate some $$$ to scooterhelp.com for being one of the best online scootering resources...
why not just undo the bolt holding the rear shock on and let the engine drop down a few inchs and change the plug if needed? but what do i know... ... into a...
http://216.239.39.104/translate_c?&u=http://www.schaltroller.com/index.php%3Fs%3Dc9a519b1a814a85198f68d69caa3dc12%26showtopic%3D62994%26st%3D20 How's that new...
hi, yuri (nz) has a dummmy tank from these guys- http:// www.saigonscootercentre.com/ they make replica seats, headsets, tanks, and other bits. the quality is...
Well, I’m waiting like you guys for some updates from Jeab-Yves :-) I think he might be away for some days… He has done some “recording” of the engine...
I've got all of that stuff. Some Piaggio original parts, and some very nice repros. It's not cheap, but you can reach me here.... -Max www.scooterwest.com ...
No, I was just referring to the stator as large or small from what it was originally paired with. I think there will be no problem. I was just babbling to...
I've long wondered why Vespa smallframes stock from Piaggio came with 2 transfer ports, and a somewhat lame exhaust. Expansion chambers were old in the 1950's,...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
