Heads and seats are readily available new and used. The front shock is not hard to change. This chap is assembling a front end but it should be helpful: ...
Any other leads....??? She is going to wait till next week to chose the highest bidder.... :( I might have a chance but will have to wait to see if cash takes...
Hey guys, '64 Vespa 90 - wondering at the Gas/oil mix: the original user manual says %2, but some people have told me as high as %5? Any advice on what the...
Hello! Anyone know where to find a Bosch BA20D 6v Halogen bulb to brighten up the lamp on my '64 Vespa 90? I read somewhere that that is the correct bulb to...
check the manual for your scoot... http://www.carlsalter.com/motorcycle-manuals.asp I use full synethic castor 927 premix race 2-cycle oil w/ my gas @ 2%...
Hey Aaron, I have some cases of imperfect factory Bosch bulbs from German and I saw some of that style but need to double check anyways and sort and test , I...
I have a few things that I'd like to sell: Zirri Silent exhaust: Stripped and repainted with VHT 1200deg black paint. Muffler repacked and shortened slightly...
Hi Aaron, i have a blue one and a clear Bosch 6V BA20D that are both brand new never used in the box. I upgraded my 90SS to a 12V system therefore i no longer...
Hi, I some advice from you experts. I have a Vespa 50R I would like to keep the 50cc engine but want to increase its power to around 100cc using a cylinder kit...
One way you could go (from the archives): On 29-Jul-07, at 8:24 AM, so1o_m wrote: 75cc racing kit from polini. polini pipe, 19/19 carb, 90 primary, 3 speed...
hey guys, 64 vespa 90 What is it that controls throttle "snap back"? I can't find any obvious springs... there is that fluted hollow rod inside the throttle...
there's a spring in the carb, keeping tension on the carb slide. if the spring is still there, the cable inner/outer might've just finally given up and is...
I am new to this forum, as well as to smallframes. I recently acquired a PK ETS that has alot of work done to it. Full circle crank, Larger top end, reed...
i have for sale a 1969 v90 vespa, stripped down in bits, most paint removed from the frame, everything is there just needs new wiring loom and cables, engine...
Mikuni makes a choke cable conversion kit for the 28mm and above carbs. It can be modified to work with your 24mm. If you can't find it anywhere, we sell them....
Ok, This is an old post/ bike that I have just gotten around to again. I changed the trans oil, spark plug, set the timing to the correct setting. Stripped and...
spring on carb would return slide to closed if its working....??? you should.... replace / check the spring on carb, lube cables or replace since they could be...
the pin "slot or hole" that holds the float bowl in place is cast with that "crack" as normal... find out what jetting you have in there... use this links for...
Early smallframes don't have much of a throttle return period. New cable and a careful cleaning and LIGHT lubing of the throttle tube will help but it won't...
Ok, just did a bunch of maintenance on my "new to me" 64 V9A1T...including replaced the headlamp bulb. While taking it apart, I undid the screw on the...
Ok...I pulled speedo cable all the way out, put back in. Rotated front tire by hand and the cable rotates. Put speedometer back on, and the ODOMETER will move...
Probably a problem in the speedo. New speedos are readily available and not that expensive. Take it out and use a small screw driver to turn it. A good flick...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
