150 miles since the rebuild New Condenser New P125 Coil Set the timing twice New points Runs like a little monster - Until it warms up. Then it dies and will...
I once had a brand-new condensor, right out of the package, that did the same thing. Replaced it with another brand-new one and the problem was solved. If this...
I once had a brand-new condensor, right out of the package, that did the same thing. Replaced it with another brand-new one and the problem was solved. If this...
A) check compression - when hot(fits description of weak compression) had a Serveta with the same problem and only 200 miles on rebuild- for some reason, ...
I had exactly the same problem with my ss180, i basically had to go through the whole ignition before i fixed the problem, unfortunately i cant remember which...
If you don't have fuel flow problems (i.e., the breather holes in your gas cap are clear), and you're bike dies once it's warm, that could be signs of a...
My SS180 ran great till warmed up, then it died, i let it stand for a bit and it fired up no problem. I've just stripped the engine and the flywheel side oil...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the vespa-sports group. File : /180ss...
vespa-sports@yahoogro...
Sep 3, 2005 10:08 pm
4178
Hi to all, and thanks for recomending me to this site. I've added my SS180 forum to this group, i've trawled my way through the whole of the Totally scooters...
i need a frame ..i have everything else my mk1 frame is beat real bad rusted..and was curious if anyone had a spare gs frame lying around for me to buy??? ...
I have a new piston for my VSC and I was told to bore my cylider .003" over the new piston size. Does that mean .003" over the widest part of the piston (at...
Hi all ... does anyone have a wiring diagram for the 10 pole ignition switch of a 1960 VS5 150 GS Vespa please ? Originally an 8 pole was in use but it had...
I have finished fixing up my scooter now, and the new centerstand I ordered and installed was supposedly the correct part, Piaggio Part Number 91047. The...
Check the scoot.net classifieds for parts for sale. Benny Mcclain has a mark 1 gs 160 he is parting out. I bought the fork and contents. He was very fair and...
Hi, I believe the 10 pole switch fitted the GS160 series 2, with a battery. Go to the scooter help wiring diagram for that model.(www.scooterhelp.com). I...
Thanks for the info. Clarke, I'll check it out shortly. Regards Gavin ... From: Clarke Moggridge To: vespa-sports@yahoogroups.com Sent: Thursday, September 08,...
got a conversion done with ss180 cylinder and p200 piston on a gs160 engine .I put the stator plate at the same place as before and it is more than 10 degrees...
I may have one. How would I tell the difference between a GS and SS plate? Are you making a 12V or electronic conversion stator? -John I ... [Non-text portions...
Can someone tell me if the steering stops cast into the front fork are aluminum or pot metal? Mine is a little worn away, and I wanted to find a way of adding...
I think it is aluminium. I had the same problem on my GS150 - I drilled and threaded M5 holes where the stops was supposed to be and mounted two Allen screws...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
