I still havent solved my flooded carb problem. wont shut off, and I am pretty sure that I need a new needle valve. I have adjusted the tang on the float arm...
a brand new carb for that bike is less than $100. Might sve you a lot of headaches in the future to just buy a new one. Try Sudco or Pro-flo or ebay - but buy...
GUYS--put up a few pictures of last sats. AHRMA NAT at BROOME TIOGA--it was great--used the reg. start gate--then a right and sharp left--then backwards on...
You don't happen to park the bike with the gas tap left in the on position do you? If yes then flooding and filled crankcases will happen as you should be in...
Steve, if you haven't already found one, I bought a 76 RM370 a while back that had a fair 79/80 seat on it with the outlined RM logo on the side and a metal...
Freind Has a 1978 RM 125 .The bikes doggin Bad Loading up I believe at Lower to mid RPM range .He's he's been through the carb four times playing with diffent...
reeds could be damaged ... From: allaboutrms To: tmsuzuki@yahoogroups.com Sent: Friday, July 03, 2009 6:45 PM Subject: [tmsuzuki] 1978 RM 125 Dogging Bad at...
He might try raising the clip on the needle one notch . If it is smoking allot , he might have a bad right crank seal . One indication is if the plug has oil...
Guys, Phil asked me the same question but he had a bit more info in the email to me...See below "A freind of mine has a 1978 RM 125 Just did a top end rebuild...
Don't forget, NBC is providing live coverage of the 450cc class of the RedBud MX National this afternoon beginning at 3:30pm EDT. Also, coverage is supposed to...
Can they be made to work well on and Evo bike? I'm talking about the black and red ones.  I have Works on my 79 RM250. I'm on  a budget for my next project....
I have had good luck with these shocks. The main issue is that you cannot rebuild them. Richard In a message dated 7/4/2009 1:49:51 P.M. Eastern Daylight Time,...
One more clue the bike doesn't want to idle . ... From: allaboutrms To: tmsuzuki@yahoogroups.com Sent: Friday, July 03, 2009 9:45 PM Subject: Fwd: [tmsuzuki]...
A less expensive one would be Progressive . For the $$ they work well . Almost as good as the Works .....1/3 the price . The Dirt Shack Lee Buchanan , Owner ...
I would look into the reeds not seating on the cage or the right crank seal . The Dirt Shack Lee Buchanan , Owner 326 Bamber St. , Mammoth Spring , AR. 72554 ...
Hi guys .. WANTED: i`m trying to find exhaust pipe for a 1975 RMs 125 . will pay good money for it . hope someone over there might be able to help me out ,to...
The nut is a normal thread, not left handed. What I use is a mid size 2 jaw puller gear puller and insert the jaws carefully in the holes of the mag. Make...
Hi,  I have your pipe!!! It's a stock one as the Kit was put on mine weeks after I got my 1st RM... Give me a call 252,333.2204 BLINN ... From: guess...
If anyone out there has a nice tank to sell I am looking for one. Does not have to be a museum piece but would like to find one thats about a 7 out of 10....
Hi Mark i have old "S" pipes but they need work as either the original silencers are missing or the bodies are rough. if you`re interested i can send you some...
The comments were taken off actual police car videos around the country: 16 'You know, stop lights don't come any redder than the one you just went through.' ...
PHIL--good luck in that hunt !!!--i have been known to buy a complete junker just to get the cover--but they usually are the first item missing--a while back...
Atta boy make the most,hair scramble ,have to work in morning but think i can be done by 10:30,race starts at 12:00,trake is 10 minutes from shop.Think it will...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
