RAY---bet DOC--would love to have that !!--gotta run--got two bikes torn apart--simple ring job on one of the TM 125s--well not so simple--i gotta keep track...
Yeh Buzzy,I could surely use an RM pipe, the hop up pipe is the same as the RM125S pipe down here and I do have another 125S powered Tm125 project I'm...
after some feedback and some looking it might be a 76rm100 pipe,let me know what you think.Ray ... From: Doc To: tmsuzuki@yahoogroups.com Subject: [tmsuzuki]...
GONNA try and post a pic.--this is on my TM 100--but is said to come from a RM (M) KIT-i do not know if this is fact--the other pic is a 1975 RM 125--right out...
I was told this was the 75 1/2 kit pipe,its about 4-5 inches shorter than the stock one,stinger is shorter but looks the same,then I look at my 76 125-100...
RAY--i would have to say that the one i have looks more like 76 rm 100--somebody wake DOC up--or JOE B---did we get the measurements from the bikes in the...
All I can say is it's not an RM125S or kit pipe for a 125M and I'd be inclinded to lean toawrd the '76 RM100. Be sweet fa difference if the stinger was...
the bike runs good withit,lots of mid and upper.Ray ... From: "VMX Suzuki Central" To: tmsuzuki@yahoogroups.com Subject: RE: [tmsuzuki] Re: 75 rm125 hopup pipe...
I need to split the cases on my '73 TS185 as the kickstarter pawl needs to be replaced. Looking over the service manual, it references a puller to split the...
-I think the 125S and the 100A pipes were the same from memory but there were some differences in manufacture possibly for noise restrictions. i have a few...
from memory, the suzuki rm100A chamber had the welded on small silencer with reinforcement welding along the top and bottom of the stinger, all the way from...
no puller needed. at that point of dissassembly, simply put the nuts back on the ends of the shafts, and using a plastic or brass hammer, gently tap on the...
Thinking it is the 100 pipe its xactly how you stated,with the reinforcment on the stinger.Thanks all for the info ,sometimes I need to slow down a little and...
I still say the 100 A pipe and thye 125 M pipe are the same on most RMs Those pictures were taken from the factory I think its not an absolute situation I...
someone in this group should make a Youtube on how to split/assemble cases and repair the kicker pawl assembly. We all have the same problem with the TM,TS and...
Thats a good Idea ... From: Robert Bergman To: tmsuzuki@yahoogroups.com Sent: Sunday, May 03, 2009 1:42 PM Subject: Re: [tmsuzuki] TS185 Case Spliting -...
After cleaning the goop out of the carb,4 kicks and ringading,the guy had i think a pe silencer on it so I took my xtra dg silencer off my 85 rm,cant believe...
I tried to describe items shown. any knowledgeable input welcome. i still have more pipes but these were easy to get to, and fit this forum topic discussion....
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
