Hi all, In case anyone needs one, I knocked out a batch of "works" swingarm center spacers to match up with discontinued Suzuki part#: '61280- 28000' and...
PHIL--good show---now knock out a bunch of MAG COVERS for the73-75 tm 100/125--and you will be my hero---and most likly a lot of others---buzzymx45 ... From:...
Spent my New Year's Eve and Day breaking down the little TM100. Wanted to pull the top-end off to see what I have before getting too far into shipping the...
There was a lot of discussion here at one point about stock jetting on the TM100. I searched back through the archives and saw several different specs noted....
glad to hear the news. it's always nice to find that you don't have a complete grenade in your hands. from the sound of the cylinder there should be some real...
... Didn't split the cases but the bottom end looked clean and everything felt tight and smooth to my rather unpracticed hand. I think the intact CCI probably...
Terry, way to start the New Year! That will be a worth while and fun project. Congrats! I'm getting motivated to go the next step with my TM before the nats...
... Yeah, imagine handing a porting tool to your 16-year-old kid and saying, "Go see what you can do with that $1,200 head on the 4-stroke, Junior." No way in...
I believe there is a misprint in some of the Suzuki literature. The TM125 came with a Mikuni VM26SC and the TM100 was fitted with a VM22SC. The '75 RM125M had...
I will disassemble the carb today and see what is inside it. The slide is stamped with both 2.0 and 2.5 markings, but the 2.0 has a cross-strike. I do not know...
... The carb on my little TM is pretty close to the specs in the manual. I measured the carb throat with a set of calipers. My nominal 36mm Mikuni measures out...
TWF--go to suzukicycles.org--a good site--up till 74 it states 22 as oem--the 75 i can not make out--also i just went to google search and it took me to the...
Buzzy: If your having Pizza and Pepsi I'm coming up! Mt Dew is a Pepsico product does that count? Happy New Year! ... do have ... track--higher and ... ...
I can't read that either. All the '75 stuff is way too small. But the carb on this bike is most definitely a 28, and the specs match up except + 1-step on the...
TWF---IT IS A NICE SITE--JUST LITTLE BUGS LIKE THAT !!!!buzzymx45 ... From: "Terry Frazier" <terrywfrazier@...> To: <tmsuzuki@yahoogroups.com> Sent:...
HOLY COW--THERE IS SOME LIFE IN PA---GOOD TO HEAR FROM YOU !!!! MAYBE WE CAN MAKE PLANS FOR THE WICK !!! THINK WARM- ER- HOT !!!!----buzzymx45 ... From: "Lee...
Terry, if it's had decent port work then I can all but guarantee the carb won't be the stock 22mm if they were chasing outright HP. 22mm is very conservative...
The carb is completely gummed up and the kid had used electrical tape to keep the needle from falling through. No wonder the thing wouldn't run. I'll give all...
TWF--like i said it is rare for these to have bottom end problems---if taken care with right service--and keeping the CCI hooked up---but the CCI statement is...
Oh, I still plan to have the motor redone. I just like to know what I'm working with. It's good to know that it's in decent shape. The bike will have to have...
TWF--i hear you loud an clear !!!--iam one of those guys that if a piston breaks--usually because i loose track of what and when on the herd--grown to 8...
SEE STEVE--IT IS TIME FOR ME TO GO BACK TO WORK !!!--buzzymx45 ... From: Steve Clark To: tmsuzuki@yahoogroups.com Sent: Wednesday, January 02, 2008 6:21 PM ...
