Ray thats how I read the ruling too. The early DT yams had remote piggyback style shocks and Marzocchi also made piggyback shocks in the early to mid 70's and...
RAY--from the 2006 AHRMA handbook----this applies to like design 75 models---sorry i forgot --is your bike a75tm or a 751/2 rm?i run marzocchis on my long...
DOC--its like 8:00am here in ct,usa--do you have any idea where i can get a rebuild kit for my aluminum piggyback MARZOCCHIS--they are 12-1/2--still good but...
TOM--head torque---i just tighten them in a crisscross manner--there is a spec and if i can find my offical suzuki how it should be done book i will post...
guess this did not go the first time---buzzy The message is ready to be sent with the following file or link attachments: Picture1975tm 004 Note: To protect...
Yes the washers are on both sides of the union. It is the injector for the crank. Do you think this is where my air is coming in causing my choke problem?...
you donot see a crack in the feed line?i have had the chain get them but that would be closer to the pump--if its cracked it will suck air and most likly it...
do you have any ... Buzzy, How did the Marzocchi's compare before the seals were blown? If you find any let me know. If you decide you want to get rid of them...
VANCE--just put them back on----wasted my new SWs at CENTREL VILLAGE trying to do doubles---the MARZOCCHIS are fine now but i am thinking down the road-like i...
Buzzy, I love the Marzocchi's I have on my Hercules. I have a pair of Sachs Hydros coming from Germany in the next couple of weeks. The last new of their kind...
VANCE thanks i see someone else loves the old euro stuff also--i miss my MAICO 75 GS400---and my RICKMAN ZUNDAPPS--thanks again ... From: vance smith To:...
FORK CHANGE- one of the other members changed to cr125 forks--he did not say if he used the cr hub--the only time i have changed to different forks was on the...
i have had a 74 TS 250 for about 5 years and about a week ago i recieved a 82 RM 125 with 3 blown motors so i looked at it for a few hours and decided to try...
Buzzy not entirely sure of parts but I'll need to sort something out myself soon. http://marzocchi.com/spa/moto/?LN=UK&Sito=moto I was going to give this site...
Does anyone know why there are two spark plug holes in the TM 125 head? The one on an angle has a hex plug in it. Did'nt know if this has something to do with...
the extra hole used to come in real nice for a compression release---used as a brake not a starting aide---on the ice---and during the warm weather it was...
The dual plug head was for quick change on a foul plug in race situations or desert racing. minibikemadman <minibikemadman@...> wrote: Does anyone know...
THIS ISSUE # 24 should be required reading for all members of this web site---50 years of SUZUKI--RODGER D interview---= CHENEY TM400 ARTICLE-- unreal---took...
... get carboned-up like the botton of the head.???? ... --used as a brake not a starting aide---on the ice---and during the warm weather it was always nice to...
200-250kg-cm is the answer to the head torque for a tm125--or if you want you can tighten it to 14.47-18.09 lb-ft.---this is according to my good book that...
Buzzy you got the address right for VMX magazine but as for the second plug hole in the heads of certain models and capacities,well I have absolutely no idea...
would be good for taking precise tuning , looking for the best bang at different timing states over the rev range . maybe just a shot in the dark . Mick Doc...
