Yep. And no, the shake didn't go away. I am still clueless as to why it shakes and wobbles. It didn't do it until I got it back from California. Towed it...
Check your inner tie-rods for wear, it's why our '85 has a shimmy in it at times. Only way I found one was bad, was to lay under the BRAT while Wife moved the...
I'm going to sale my 1979 Brat if anyone is interested. The body is in great shape for a 79. The engine recently blew a head gasket. I just don't have the...
I had a problem with my 86. I don't know if this is the same problem. I had a referbished tank on a brat I was getting ready ti part out. I needed a tank on my...
Flush the lines. Make sure the fuel pump wires and fuse block are in good condition. Check the fuse for the fuel pump. I've found that the fuse can get...
... try to get some pics done soon im mot forgetting you fenders right? or left ... sun and repost then thats my first day off sincerly joe ... Try it now. ......
Thanks. I'd be interested to see both. Conorj ... try to get some pics done soon im mot forgetting you fenders right? or left ... sun and repost then thats my...
Interesting, will have to follow up on that. Do you have a part number/supplier? I don't find "Inner tie rod" anywhere. Burt The ethnocentric, right wing,...
You probably won't find a number for it as it is inside the steering rack. Old Suby parts manuals will have a number, if someone out there has a copy.? Gary ...
I checked my old sooby book for that inner tie rod part number and it's not listed. What the other poster was talking about, is the rod that protrudes out from...
I ordered 2 of them from rockauto.com Part number 94 1014024, these were a closeout sale item for less than what the other ones listed. Not sure if they still...
how hard is this to change i have a grinding noise i front wheel check wheel berrings they are find front wheel will shake with free hand and i can fill the...
I havent been able to figure out a way to remove the head without pulling the engine. It's not that difficult to pull the engine. I did it by myself, without a...
-You can remove the head w/engine in place at least on the 80-84 models..Subaru planned for this-they had holes in the frame rails in line with the long head...
The rack bushings are rbber, oil soaked, and allow the rack to move back and forth about 1/8 inch. Anyone know where the rack bushings can be found? Burt...
... back and forth about 1/8 inch. Anyone know where the rack bushings can be found? ... I don't know what year yours is but they are available for the 81...
Hi all, am new here, but not to my brat. I have to drop my transaxle to find why the left output shaft knocks and wobbles up and down. I am thinking planetary...
... check wheel berrings they are find front wheel will shake with free hand and i can fill the tie rod giving when i shake it so i assume that is the problem...
Maybe its true you can remove the head on the second gen, but it's the first gen that the question was about and which I was refering too. Send instant...
If you can't find replacement busings for the rack, you can make your own from an old inner tube and glue. Layer them the thickness you want until you have a...
OK, I can find the rack bushings for the 1980 and up, I can find racks for '79- '80 and '81-'84, but no rack bushings for the '78 - '79 appear to be available...
... check wheel berrings they are find front wheel will shake with free hand and i can fill the tie rod giving when i shake it so i assume that is the problem...
What do you mean by window holder? ... From: rochetz <rochetz@...> To: thegreatsubarubratclub@yahoogroups.com Sent: Friday, March 21, 2008 8:22:13 PM ...
the holder is what the parts book has the piece metal braket that bolts onto the window part #762222170. I went to the dealer and he showed me the blueprint of...
