It was a bad front wheel bearing. Even after cleaning it up it didn't roll smoothly in my hand, so I replaced it. The bearings on the other side felt just...
Ok resently i discovered that my motor mount on the left side is busted and i need to know if the mortor mount from a second gen with a ea81 is compatible with...
great gen 2 brat for sale. near perfect condition! one dent in front fender(repairable). a/c, 4 sp, stock, red, have pics...always had synthetic oil, have all...
i just bought a 85 brat it seems to be in great shape engine has been rebuilt but when ever i put my foot on the breaks the steering shutters i have put it...
If it only shutters when you braked then i would say its time for new front brake pads and rotors. It sounds to me that your rotors are warped if they are not...
Matt, I had hoped you would have gotten some sort of reply about the motor mounts by now. I really have no clue. One thing you might be able to do is have a ...
Call a dealer parts department. They'll be able to tell you if they're the same part. Conorj Tony Gascon <a.gascon@...> wrote: Matt, I had hoped you would...
I don't see why they would be different motor mounts as long as they are from the same size engines. I think that Conor and Tony have the right ideas. Then...
... Heh Heh! I've got them too now, but mine are all to do with me *fiddling* with the timing the other arvo. Better put it back sometime. (I just like to...
Yeah, I like to push things to the max. Sometimes a bit too much. I live in the mountains in northern California and I sort of drive a little too fast on the...
On decelleration, in a slight bend, I get the shakes. Turn the wheel slightly, no more. Tie rod. One of these days I will replace them. LOL BTW, the '82 is...
thanks alot guys, i just bought it and i have had nothing to do with the engine replacment so i am lost about the engine mounts i got some new rotors and pads...
I have had the shakes since day 1buying this truck but now its at lower speed 45 -49 now i know i need new tierod ends but i think i need new front wheel...
I am replacing a cracked head on my engine, does anyone know the torque on the mounting bolts to the engine for the head? My manual does not say how much ft....
37 - 43 ft.pounds. I am about to purchase my second gen 1 brat for partsI have a 78 brat I have been working on for 5 years( when I have money,I can't find...
Hi folks, I hope someone can help with this. When I replaced my original carb with a Weber, I had the PCV system hooked incorrectly. Apparently, I built up...
I looked through both manuals that I have and they don't say anything about an oil seal for the front of crankshaft, so I went out and split the case of an...
I stand corrected on that crankshaft oil seal, there is one. It looks easy enough to get to and to replace. Pull the crankshaft pulley off and the seal is...
Hi folks, The pulley is off, and I can see & feel the seal. It looks a bit cock-eyed and it feels a bit loose. However, I have no idea on how to get it out....
Kragens has them for $10 new. Drill a small hole on both sides of the seal and drive a screw into each hole and pull it out. May have to twist the seal by...
What about the tires? They would be the first place I'd look. Conorj matt hammond <hotrod_for_life@...> wrote: I have had the shakes since day 1buying...
I don't know if this is the same manual you're using, but my Chilton's, which is a piece of crap, does not seem to have that spec. If you can't find it, let...
Sorry, I guess that last email wasn't necessary. Where are you located Subsam? Conorj Samuel Edwards <subsam68@...> wrote: 37 - 43 ft.pounds. I am about...
Thanks for the info everyone. I did find it tucked away in the paragraph towards the end. Conor Johnston <conorj3@...> wrote: I don't know if this is...
To remove, turn counterclockwise. 17 mm is correct. Best to use an 8 point socket with 1/2 in drive ratchet. I wouldn't try hitting it with a hammer....
