I think I'm missing something here. An engine mount deteriorate to the point that it allows the engine/transmission to sag and shift so that the car starts...
If one engine mount is deteriorated does it make sense the others may be as well? This was the case on my 89 2.5 liter. I had the same problem with the...
Jim, The problem you are talking about ONLY during acceleration, is common to all Chrysler products I have ever owned. It concerns a vacuum valve (the one I...
Kevin, You aren't missing anything. I actually don't think the mounts are as big a problem in breaking axles as the only one I have had come apart was clearly...
Ed, that checkvalve is there and I even bought a new one at the dealer when I bought the car. The problem is between the control unit and the diaphram. I have...
When did the mounts become obsolete from Chrysler? I replaced the front and right side mounts on my wife's '88 T1 last summer with factory parts. As I recall,...
The poly mounts are out there, but when we were trying to buy them there were none in stock anywhere and none about to be made. I didn't check the dealer for...
I did a search and couldn't find this problem: every time I accelerate the speedometer goes from 30 miles an hour back down to 0 all the time I have my foot on...
Here ya go...never used 'em myself but they get great reviews on the turbo mopar boards... http://www.polybushings.com/pages/moparmounts.html Honestly, I would...
Well, I popped the dash cover plate and found the headlight module that Roland described. It appears to be a sealed unit with a modular connector. The...
I have always made a habit of checking the dealer first and only going to the aftermarket when the part in question is obsolete. On those occasions where I've...
I agree. Mix one non-mechanically minded owner with a questionable repair garage and you get large unnecessary exchanges of $$. jeffhambone@... wrote:...
What year cars had the headlight control module UNDER the dash by the steering column,want to get one or two from the wrecker for an experiment. "J. Sabel"...
and bought the $28.00 piece of plastic (gear) and fixed the odometer. Thanks to all involved in the process. Now I need to work on another quirk, When I go...
Bought a 83 Dodge 400 with air conditioning , But it has the belt removed. The pulley on the compresser spins freely. How can I check to see if it is charged...
If the belt was pulled, it almost certainly does not work and has no freon. Somebody pulled the belt thinking they might save a bit on fuel, or it was making...
Bob: The thing that is freely turning is the clutch...the compressor isn't actually being turned until power is applied to the clutch. Most likely though, if...
While I agree with the previous comments, if you are mechanically inclined, for a small investment yopu might be able to reserect it. I did last year in an 88....
I have a 1991 Chrysler LeBaron GTC Turbo. I believe it needs a new head, and the air conditioner motor needs to be replaced. The top is ripped badly and rain...
I have had 2 Daytonas and I am on my second LeBaron convertable. I enjoy driving that platform and plan to own more in the future. If I had yours, I would...
I agree with mark I bought my 95 for 1900. I put 1200.00 into it. Some of this was for upgrades. But now I have a car that is reliable and everything works....
Kathleen, I always look at what it cost per monnth. When a car gets to 250.00 range its time to get something else. You are correct buying someone elses might...
Where is this vacuum check valve in a 4 cyl? The manual says behind the dash or something, not very clear and no illustration. I will check the vacuum at the...
In a message dated 6/1/2007 12:04:24 P.M. Eastern Standard Time, vcrpro3@... writes: There is a small tab on one side that appears to be a safety. It is...
... If you can't afford to make a bad choice don't. Get rid of it and find another one. If "all it really needs" is an absolute then maybe you could do it -...
I got poly engine mounts last year from Johnny Spiva, who I think is a member of this group, as well as a contributor of info here. www.PolyBushings.com is his...
Hello Mike, Thank you we contacted them, by my dad seems to think that the 1/8" won't do the trick. He is gunshy, like myself after the last 2 axles pretty...
Spivas stuff is very good quality. My Mounts & Control Arm Bushings were ordered from Spiva. He does honest work and communicates well by e mail. Its true...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
