driver and passenger side the complete units (window, regulator and motor) both go up and down very quickly i'm asking 125.00 for each or 220.00 for both. I...
What model year and color is the clip? Location? Daniel ... Stay in the know. Pulse on the new Yahoo.com. Check it out. [Non-text portions of this message...
Why spend that much for used ones when you can buy rebuilt for $100 plus a $50 core charge and they're guarenteed for a year. Joe M 92 GTC Conv 3.0 5 spd...
Thanks Joe appreciate that!!! sure you can buy a rebuilt window motor for 150 with a 50 dollar core plus shipping 2 times then go thru all the hassle of...
Hi! I have another problem.... I have a 1991 lebaron LX convertable. The blinker stalk/switch seems to be loose as in electrical connection. Some time the...
I am installing a chrysler 2.5l 4cyl engine. I bought it used and would like to replace the front main seal. The timing gear sprocket has 5 bolts. My...
I have a '92 Lebaron convertible. In the past, the rear window on the drivers side was inoperaive but in the up posiiton. Been that way for a year or so. The...
Hello Group, Does anyone know if the stamped K frames are completely interchangable with the cast ones? I have the stamped, and have the chance to get 2 more...
i installed a replacement shift slider on my 93 lebaron. i got it on ebay for less than $20(including shipping). much cheaper and better quality than the...
Are you referring to cast control arms vs. stamped control arms. They are only interchangeable if used with the corresponding k-member. The rear bushing is the...
Something I learned the hard way: When you use '87 spindles on '93 control arms, the wheels are located too far forward. It's said that you need the '93...
I had some problems with my 91 too. To help locate the headlight doors check out my web site (http://wgsite0.tripod.com/lightmotor.htm). One of my problems...
So if I use either the K frames that are cast from the '91 or the stamped from the '88, I should be ok if all I use is the K frame itself, right? Mine is right...
Hi John, According to a body/frame shop parts list there are 5 different K frames (by year and type trans), control arms (4 different choices depending upon...
Not to hijack this thread. But...... If anyone needs a K-frame and cast control arms, let me know. I just replaced the complete assembly in my 93 Lebaron Vert....
John, You're still mistaking the name for the parts. The k-frame is the stamped and welded part that the steering rack is on top of. The control arms (also...
Looks like with a little TLC you will have a very nice car. I assume the first pictures are from when it was new and it has the booboo's now. Joe M 92 GTC 3.0...
The left rear window (drivers side) won't go up. Who can sell me the parts or a full replacement mechanism to fix? Will an '85 salvage unit work? Thank You...
The difference that I know for manual or auto transmission, is the manual cars had a bracket on the K-frame to hold a strut for the tranny, that the auto's...
Ean, My '88 auto also has that bracket (unused) on the K Frame. ... __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo!...
This is a common problem with the LeBaron convertible, and there is a post about this subject once a week in this newgroup. Search the newsgroup about "1/4 ...
I had this problem with my 86 Lebaron. The motor would run and nothing would happen. You could raise and lower the widow by hand. It was the plastic window...
85 and 86 should be the same as long as it is the same body style. If you have a convertible, it may just be the drive "tape" is bad. Bill Vose 1985 Mark Cross...
hey there. Just wondering what the best thing to clean the top is. it's white, new and getting dirty. anything good to use?! And i wanted to lower it. is it...
Personally, I just take mine to the car wash where you spray the car yourself. Hold the wand a few inches from the top material and it blasts all the tiny...
Go to: http://koala-products.com/ It's the best convertible top stuff. I used it to clean up an old white top and it worked great. It was given to me by a...
Hi everybody!! I have gotten such great advice in the past. I thought I would challenge the group with my latest problem. You see my wife... just joking! My...
When you did the O2 sensor, did you use a Mopar part, or a Bosch? Just FYI, the Bosch is known for working in parameters (no code) improperly...ie running...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
