Rod or Steve,

Is Pin Z-8 (R/W) the gate also?

BTW: Thanks for the info!

Jim - Glendale, AZ.
www.evalbum.com/425

>Rod Hower wrote:
>
>There is a brown (emitter) and red (gate) twisted pair of wires that come
from the PZ >plug on the control (14 pin connector looking into the plug).
Measure the resistance >between the red and brown wire.
>We put 10 kohm pull down from gate to emitter, along with an 18V zener
diode.
>So you should see approximately 10 kohm. Some really early controls did
not have the >10k resistor, so it should read considerably higher.

--------------------------------------------------------------------
mail2web LIVE – Free email based on Microsoft® Exchange technology -
http://link.mail2web.com/LIVE