In <23638-SnapperMsgBEA039DDC3262A76@[192.168.1.99]>, on 10/01/2007 ... I think you have everything you need. I look and see where the rod connects for you....
In <23638-SnapperMsgBEA039DDC3262A76@[192.168.1.99]>, on 10/01/2007 ... I looked at a spare latch yesterday. The rod connects to the lever (the only moving...
In <1191333246.5593.3.camel@...>, on 10/02/2007 ... I think you need to ask the fellow you got the latch from if can swap what he sent for one that will...
The assembly I took out and sent was out of a 1987 QSW with "power locks". ... -- Terrible or not, difficult or not, the only thing that is beautiful, noble,...
Scot you sold me the rod ... but my latch has no hole in it to accept it. I tried to figure this one out... there is no problem with the rod that you sold...
In <1191378718.5593.15.camel@...>, on 10/02/2007 ... I don't know if I can get to it today, but I can take measurements on the lever so you will know...
You could also use a set of Audi Coupe Quattro springs (90-91) in the front with the stock front uprights. This should get you an extra inch or so over the...
So, I go digging around in the rear suspension, brakes, and drivetrain on Faith recently. Nothing I didn't already know, the shocks are shot, bushings and...
The latch in the Yahoo picture is a Non-"powered" latch. Scoty ... -- Terrible or not, difficult or not, the only thing that is beautiful, noble, religious,...
AFAIK the rear calipers are specific if you want to bolt and go. You might be able to find other VW calipers that would work. I have used calipers that have...
In <47040F13.5@...>, on 10/03/2007 ... I think you need to go for rebuilt ones. Look here: http://www.busdepot.com/details.jsp?partnumber=535615423X...
Last time I had my carpet out ( ugh what a job) the floorpan was soaked and I removed all the bottom insulation as it was pretty much trash. In a hurry to get...
Go to a carpet store and get some synthetic underpad. Often they will give away a couple of yards that are ends from a job, or sell it for $5. Synthetic...
Not sure hoqw thick you need the padding(I know the Vanagon flooring is quite thick), but Swettcomposites.com sells a 3.5'x5' sheet ofeither 1/4" or1/2"...
In <4704567A.6070802@...>, on 10/03/2007 ... Our cars are "antiques" to all but specialty suppliers, and not worth listing. You have to call to find...
Correction, that should be www.sweetcomposites.com. John Sweet has pretty much retired from the composite supply industry, but Davey and Jennifer have taken...
Found the post that mentions the use of MK4 calipers on the rear of ... a)The soft line going to the caliper needs to have the banjo fitting fo the MK4...
... I bought two brand new calipers for the back of my GTI two years ago. We have no reason to believe that the calipers for the back of the QSW are hard to...
Buy em here: http://www.discountvdubparts.com/ Or, call (850) 669 5733 and order them from my dad. He can match the online prices. They're the same as...
One of my former QSW has a leak into the passenger's side footwells F and R. Anyone found a cure for this? We repaired a body seam near the heater. A contact...
P.S. Go see my folder (CP's stuff? Chris's stuff?) in photo gallery to see just how much tape I used. ************************************** See what's new at...
... Check plastic sheet behind door cardboard. I found mine to be in shreds/nearly nonexistent Covering up every hole in the door metal with 100 mph tape...
In <fe6qir+hop7@eGroups.com>, on 10/06/2007 ... The way to test for the source is to pull the rug back at the doors, and put a folded towel there. If it gets...
So I parked my Quantum wagon in one of Seattle's fine north-end neighborhoods and came back to a busted left tail light. Anyone got a spare lying around? I...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
