Since I changed from the RC4160, to that monster cone, I have had some problems with oil leaks due to Positive Crancase Pressure. I have already done the PCV ...
Maybe just to be safe you should get a full small-vehicle trailer and put the whole Twacker on it? I think the price would be similar (read: not too much more ...
Saturday I replaced both Sway Bar Links. The driver side one had no bushings and I figured the passenger one might as well be replaced since it was most likely...
doesn't sound right to me. You say a larger filter causes more crankcase pressure, what happens if I don't use a filter at all?<br> I think only 'so much' air...
If you can afford a trailer to put your tracker on that would be neat, then you could always use the trailer to haul stuff behind the tracker.<br> Try getting ...
I was just thinking the same thing. I got 98% on my mechanical apptitude test and I can't see how an air cleaner would raise the compression of an engine.Just...
I agree that the K&N filter will not cause excessive pressure to build in the crankcase any more than ANY filter could. They are just two things that don't ...
I also agree, the engine will only suck in as much air as it needs. The performance benefits only arise because it is eaiser for the engine to suck in the air,...
Mine needed tightened up this weekend, they were pretty loose. Got the handeling back. I still have the SHIMMY in the rear, and replaced the shocks today. . . ...
Coult be anything really, so I am just eliminating the PCV and going straight through to see if the oil leaks stop. There should never be oil leaking from the...
I don't know, I hear different things from different people. Most say that with the more air placed into the system, the more PCV is needed.<br><br>More air...
He had a 2.8 pulled today, they are testing it. The last one was a piece of crap, he wasn't satisfied with the noises it made. If he has to, I will have to buy...
I thought I saw on TV that if your use duralube, you really don't need oil.<br> I saw some guy on TV throw sand and spray water on the crankshaft bearings ...
1st rotate the back rims to the front.<br>2nd, does it shimmy all the time, or just when you apply brakes? when you apply them soft or panic stop? Brakes while...
When I hit about 65-75 is when the shimmy starts. The tires n back USED to be on the front, and I think when I rotated them is when it started, with those ...
I have just figured, forget it, that engine is coming out anyhow, so I'll let it leak and whatever else it decides to do.<br><br>With my extra cash, I'll ...
It was a while ago,right here at Malaspina College.I never went anywhere because of it.Spent about 10 yrs in the autobody-painting industry instead! BTW,Mr....
why won't a v-6 last to long? If the V-6 is healthy when you put it in...then I would see now reason it would not last. As long as you don't beat it to death....
I've got a friend who just got a soft-top 97ish model and he asked me about putting a kayak on top. Any of you guys found the solution to this without getting...
I have gone threw three cv s in the past week they have all been to short Ive tried two diffrent brands they are all about 1" shorter then the oem shaft .Ive...
The best setup I've seen was on a Samurai.It had 4 removable poles in each corner of the bumpers to make a complete frame overtop.The guy carried a 14 ft alum...
I've seen this tracker in one of the 4x4 rags. He's working on or got a 9" bolt on lift. Check it out...<a href=http://www.izook.com/kickntrack/jim_mazzola.htm...
