have had mine on for about 8 weeks without any problems. Mine are 1" Procomp TJ wrangler spacers with the hole bored out and I only have them on the back. On ...
o problem! Email me directly so I can give you my mailing address and I will scan them for you. I have had my spacers on for about eight weeks without any...
id any of you guys have taken out the front anti sway bar in order to get mor flex ? I have the 2" OME lift kit and, as i understand, this bar was intended for...
took mine out and it handled great offroad but sucked on the street. I do have a four door and it sways more then my old 2 door anyway. So maybe a 2 door would...
i Wayne<br><br>thank's for your advices, i just took the bar out, so i will try on road when return to my home. Unfortunately will have to wait for the weekend...
ell, be carefull without the swaybar on when driving on the street. You'll find that normal cornering produce quite a bit of body roll. (just remember, these ...
ake sure you keep the origional nuts or a replacement of the same size, that way you can put it on while your wheeling to keep the bushings and washers in ...
ey guys,<br><br>Thank's for your advices, As i understund that this kind of vehicle is not intented for speed races, my on street driving is moderate as police...
k, I went to flip the strut mount today, and ran into a few problems. When I tried to undo the top bolt, the top of the strut would just spin. How do you keep...
don' know yours but mine has a hole for an allen wrench on top, so i put it and the use a open wrench to unloose the nut.<br><br>Maybe if it's not allen, may...
omeone ever Chat here, i have spended a lot of time in the chat but noone seems to appear.<br><br>Advice if anyone is interested.<br><br>Bye<br><br>Marcelo,...
have a GEO tracker with a 2.5 procomp lift kit installed. I want to buy a set of 31x10.5 and a some new rims(15x8). Does anyone have this size of tire on a ...
don't know how much the fenders will need to be trimmed, but if you find out, please let me know. Have you considered 30"x9.5" tires instead? They would work...
ell that is a good question! I have not made that decision yet. That was my next question to ask. I'm looking at Mickey Thompson Baja Radials or maybe a...
i guys,<br><br>I should consider seriously the chance of installing the 30-9.50x15 insted the 31's, actually i'm using the 235/75-15 that are very cose to the ...
ea, changing the gear ratio is just one of many things I have on my TO DO LIST. Are you running stock rims or do you have after market? If after market what ...
'm running 15x7 American Racing wheels style 36, a three double spoke rim, very good looking. I really don't know how much backspacing they have<br><br>I will...
lthough not the "proper way" to do the trimming, it worked... Grab a large blunt object (I used a 5 pound sledge) and tap with force the rear corner of the ...
hanks for the tip....I'm looking for some fender flares to cover up the mess I will make. Haven't found any yet! I'm getting my 15x8 and a used 31x10.5 this ...
ushwacker makes the "Flat-Top" flares for the Tracker. I priced them at about $380 for all four. I have yet to see one with these installed other than ...
raig,<br>Like you, I've been searching for "high performance" parts, including a better induction system, for my '95 Tracker. Unfortunately, the Geo/Suzuki ...
did mine the same way! 5 pound sledge and hit the 1 inch ridge on the inside of the fender well opening Then I trimed the plastic side moundings and the ...
f it for a 8 valve motor your can get a K&N conical filter to replace your air box. They are a universal model with I believe a 3inch opening to slip right on...
i All,<br>I am actually an ex-Tracker owner, but still think <br> the little 4x4s are pretty darn fun to drive off-road. I also have some stuff that's looking ...
ey everyone,<br> My Procomp lift will finally be in on wednesday and I was wondering if anyone can lend any tips on difficulties they encountered when ...
installed mine about 3 weeks ago. It went pretty smooth. Had to tourch cut my rear engine mount to fit the Procomp addition. It says in the instruction that...
