Up thru ' 69 H-D did not have a frame #, left engine case was the only VIN. There was slight change in these frames in ' 65 at the rear of the frame, the horn...
Hi folks, I'm new to this board so I don't know if this subject has been brought up before or not. I just picked up a '73 FX. It has an SU carb which I...
Thanx Terry ... From: Terry Coombs To: shovelrider@yahoogroups.com Sent: Sunday, January 30, 2005 12:27 PM Subject: Re: [shovelrider] Prob ... That could be...
I just got my first shovel, 1980 FLH, I'm looking for a reputable shop and riding partners in or near Baltimore. Any help is greatly appreciated. thanks...
I have had some success using a combination of both the paper gasket AND the copper gasket. Also the first thing I do with a Shovel is replace the exhaust...
Boy, that's a good question.my 1975 with a Crane Drag ignition and an S&S Carb fouls the rear plug. I'll be sitting here waiting to see the replies you get,...
I have a problem and hope someone out there has the answer. I have a pair of Shovelheads, a '76 & a "75. Both scooters have the original cam and on both bikes...
1980 FXS Lowrider, original owner. Just had my heads & rocker boxes powder coated. I'm usin the rocker box bolt setup vs the stock stud setup as I made that...
Great question Buk! That's what I was thinking too! The only way I can see that you're fouling the fron plug, is if you have a severe misfire situation on...
I found the problem. I checked the front cylinder compression. It was only 52 PSI. I then put a little oil in the cylinder to see if the compression would...
Acceleration: Put Into Perspective One Top Fuel dragster 500 cubic inch Hemi engine makes more horsepower than the first 4 rows at the Daytona 500. Under...
Thanks to HwagRyder I have found the answer. It is not the cam but the points. Apparently "standardization" for the purpose of interchangability has...
Reminder from the Calendar of shovelrider
http://groups.yahoo.com/group/shovelrider/cal
Monthly Meet Shovelriders MC
Saturday February 5, 2005
10:00 am -...
shovelrider@yahoogrou...
Feb 5, 2005 9:40 am
2276
Reminder from the Calendar of shovelrider
http://groups.yahoo.com/group/shovelrider/cal
Open Meeting ALL motorcycles
Sunday February 6, 2005
10:00 am - 11:00...
shovelrider@yahoogrou...
Feb 6, 2005 9:40 am
2277
I'd use a little never-seize for the bolts. Put just a little in the bolt hole, not on the bolt or it will squeeze out onto your gasket surface. Put the...
I used to live in Bowie MD, in NC now still go back alot tho, and the only reputible shop is your own garage.... i think the only shop that i would use for...
would like to invite any shovelriders around the jacksonville fl are to come out and meet at the applebee's restruant at the corner of A1A and J.T.Bluter Blvd...
reality dictates i just have to many projects. so i have decided to sell my 1957 R50 BMW and my 1982 FLT. the flt is basicly stock. paint and all. except that...
I REALLY WANT TO GET ENOUGH OF US TOGETHER FOR A MEETING HERE IN TEXAS. HOW MANY MEMBERS DO WE HAVE IN TEXAS? CONTACT Southernbikers@... if your in the...
yes no 1 choice in maryland for old stuff is precision for shovel and pan ask for ed the owner 301-937-5783, dont mess with mdo , zippers is good also there is...
This is SHOVEHEAD site right? I have one of my SHOVELHEADS bored and stoked but still prefer to ride the others I have. Shovels are not about speed... getting...
... Now for the rest of the story; Since I just got this bike and don't yet know what all has been modified, I adjusted the pushrods for hydraulic lifters as...
Seems that those who are trying to help I.D. my new(old) frame do not have enough info. from me. It does not have numbers and never did. The frame has a 58...
Arlington Texas Lisa <southernbikers@...> wrote: I REALLY WANT TO GET ENOUGH OF US TOGETHER FOR A MEETING HERE IN TEXAS. HOW MANY MEMBERS DO WE HAVE IN...
HELLO TEXAS MEMBERS AND EVERYONE ELSE TOO, I WOULD LOVE TO MEET WITH AS MANY AS POSSIBLE. I HOPE SEE AND VISIT WITH A LOT OF SHOVELHEADRIDERS @ THE FOLLOWING...
Is anyone planning a monthly get together in Kansas ? If yes, please tell me where. If no, is anyone else interested. I am in the north central part of Kansas....
... So you want the Shovelhead perspective?? haha ok here ya go: One V-Twin shovelhead 74 cubic inch carburated and exhausted Harley-Davidson Engine makes more...
