Well your old man obviously doesn't know much about cars, especially if he is afraid to do a simple tune up. I don't do any major work on my car, but changing...
Okay to get to the ECU you must take out the passenger seat. Its not hard,there are five bolts that hold the seat to your car. After you get those off its...
he he.. seems like you are in need of a tune up.. my car would do that whenever I would get a bad ignition component. changing the rotor is super easy SUPER...
Awesome, thanks for the help, everyone. I'll probably start working on it tomorrow morning. At the very least I'll check the timing if I can't get to the ECU...
My brother is getting rid of his 87 maxima 4door. Its white with brown interior, 111000 miles. Automatic. New brakes, tires, axles steering rack. He also just...
yeah last time I added almost 14 gallons...but mind you it was all around town driving and I still got 320 out of it...and this is also with running the ac...
Changed out the headlight and wiper switch(while I was in there). It's a miracle...both headlights working and wow! does the new switch feel more solid than...
....where thier wheels get covered in brake dust really quick? Granted my wheels are a little more open than the stock wheels, it's interesting that I cleaned...
I recently removed the tint from my back window because It looked like crap(full of bubbles and purplish). but in doing so I screwed up the defrost lines. I...
I know one of the best installers in Windsor, and have asked him about replacement of my rear window. He said first, that the window is no longer available...
hmmmmmmmm in stop and go traffic my wheels would get dirty...but only in hard braking. Not in regular driving. Then again, your wheels are more open and mine...
dam I would send you my extra rear window..but ups doesn't ship big glass easily anywho..I did my front window and it seemed ok..once rain came..bleh water...
Yeah, I figured that, but it's just odd my wheels are now completely black after 5 days of driving. It normally takes my car at least 2 weeks before it gets...
Mine has been shot for quite sometime. It's interesting on cold starts because my car will idle really low and then stall out. I've also had some problems with...
Hey, how much did that new AAV cost you? Mine isn't that bad during the summer months, but during the winter it always stalls out on the first try and idles...
Dude, my wheels get so black you would think they were gunmetal wheels. I didn't have the problem with the stock wheels, so it's definitely the openness of...
Hey guys, my car leaks from every direction. I've got an oil leak, I've got a windshield washer leak, and now my windshield is leaking. It only does it during...
Here's a link to a place that sells the brake dust shields for the Infiniti I30, '96+: http://www.autopartsauthority.com/kleen_wheels/infiniti~i30~brake_dus ...
Not sure, but I would guess that the windshield wouldn't be any more expensive than any other windshield to re-seal. It is expensive to reseal the rear window...
It was $77 all together from partsamillion.com. Not exactly cheap, but so far I have no complaints. Car seems to smooth out a little more with this one. I'm...
Yeah, I'm not going to worry about it too much. I can clean the brake dust. It was just surprising how quick they dusted up. The dust shield is a good idea...
My gut feeling is that the weatherstripping it most likely the culprit. They usually are the first thing to fails, even with rust in the area. Since it's the...
It's pretty straight forward: 1. Remove hose clamp and intake hose. 2. Pop the little clip that secures the harness to the valve. You can use a screwdriver to...
On maxq88's site there was a time when we had racing heads available. How exactly were these heads different from the stock setup? Also does anyone have the...
HMMMMMM. how about this. Is it brake dust or more mud like? Do you have any oil leaks. Since you are traveling much longer distance, temp goes up and all that....
... secondgenerationnissanmaxima@yahoogroups.com, "drjdakota_2000" ... I would imagine a more agressive cam, probably some port/polish work, bigger valves,...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
