Well the thing I find wierd about this is that the few people that have done this didn't have any problems like this. At most, the only complaints have been a...
You talking about checking camber? A level would kinda work, but again, an alignment shop should be able to look at this. I believe camber needs to be set to...
First, the TPS for an auto does 2 things....detect idle, and detect WOT. It doesn't directly affect the A/F ratio. Adjusting the TPS isn't going to do anything...
I wouldn't touch the carbon canister unless you absolutely need to. These things generally do not need to be serviced. So I would exhaust all possibilities...
Why don't you put the old ECU back in and see what happens? If you keep running the car rich like that, you're going to do a shitload of damage. Trust me, I...
Theres no adjustment to adjust the tires in the way they are standing. I don't mean the alignment on the tires but the way they are standing. Imagine a...
Yeah remember when my car was doing that, it was the ecu. And idjot me used carburtor cleaner on the throttle and fucked up my tps, and my carbon canister was...
With that much opil, I'd seriously check out the possibility your engine is "Making Oil", or has a blown head gasket / warped head...allowing water to...
Does anyone know something that works well to clean and detail under the hood "by hand"? I am very leery to use Gunk or something where I have to spray to...
Yeah there is! It's called Camber! When you lower a car, you can install camber bolts to adjust it! ... standing. I don't mean the alignment on the tires but...
I saw a maxima like this on car domain and on this club. "http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll? ViewItem&category=6400&item=2463288183" is it the...
You're not mistaken Hector, Max88q's 2nd gen looks identical to that one. But that's not Q's Maxima, in fact, I doubt that guy is even a member of this club. ...
i would never take my car to a place 4 a oil change r u crazy hector. but today ima adjust the cable to the tranny. but i have another question what kinda tool...
Um, I think mine came off by hand after removing that little lock it has that has a screw in it. It just pulls up or twists up. Either one. I changed this on...
1. Disconnect the speedometer cable from the transaxle. Remove the cable assembly retaining bolt and lift the speedometer cable out of the transaxle housing. ...
i was looking through the maxima.org forums and found this: http://forums.maxima.org/showthread.php?t=239283 does anyone have any more information on this and...
Oh you mean automatic yeah that's a commong problem when your brushing gets old. Its not hard to replace, from what Ive heard. It should be on the haynes...
Yeah, my shifter bushing went bad too. My mechanic replaced it free of charge for me. The part is only around $5 and it would have only been around $25 to...
My front right tires brake caliper has gone bad. It is too tight on the disc and doesn't allow too much movement from the tire. Luckily it still allows enough...
New front calipers are easy easy to install, but run about $45 to $80 ea., depending upon where you shop, and if they're "Loaded" or not - if your only going...
does anyone know on how long they lastr? Ive never replaced mine. What are the signs they are warped or that its dead? How do I know if it sticks to the rotor?...
Ok, i am going to do the manal..but while Im at it? should I might as well lift the engine all the way out? making it easier to work on my power steering?...
I'd say the calipers last about 90-100K miles. My car's got 133K miles and I've already had all four calipers rebuilt, all of them seized up between 90-120K...
I replaced the engine on my 85 nissan maxima, and I didn't label the vacuum hoses and I don't know if plugged them back in the right location. Does anyone...
The Haynes manual has a diagram of that. You can get it from autozone or checker, or any autoparts store. -HEctor ... From: ddelld<mailto:ddelld@...> To:...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
