Are the GT40P heads considered an acceptable replacement head for a 93 GT to compete in EP? Also, does the proposal to allow sub frames in EP for Fox mustangs...
Well, Geoff, for starters I'm going to fix the fender & door and paint it. That's part of why I haven't been on here in a while. Again. I'm not committed...
My problem is that I started doing this stuff in the Cobra, and nothing else I've tried gives quite the same grunt. Like I said, I tried other cars - a Miata,...
warning: long-winded, and pro-bmw ahead...but plenty of ford content... I went the mustang route because...well...it was what i had. My dad bought it new in...
Can't argue with a word you said. But, my BMW is an '87 325i not a '95 M3. So it's 170 hp not 240. But you're also right-with a full interior and full...
Perhaps if you're giving yourself a year, you'll be able to scrounge up on the used market, the griggs or maximum motorsports parts you'll need if your skills...
... Tim, I have new Griggs suspension pieces you may be interested in. Let me know before I put them on evil-bay. Geoff ... empty ... about ... well ... parts ...
I have a 1999 GT that I wrecked in November. I slammed into a light pole and flipped it landing on the drivers side. So obviously the body is totaled with...
Decided to pursue an alternate path to track nirvana, or get out of tracking altogether? pete out... santa barbara,ca ... From: "Geoff Craig" <ASEDAN@...> ...
... tracking altogether? New path...I have lots of time!!! geoff ... not ... a ... hood ... too. ... My ... brakes, ... shocks ... year ... end ... 5.0ho ... ...
Definitely, Geoff. Are you going to be at Park City in 2 weeks? Or shoot me an email with a phone number & we'll talk. ... Let ... not ... pounds. ... not ...
Where are you located and do you still have the rear end to it? midgetchick16 wrote on 4/12/2007, 11:39 AM: I have a 1999 GT that I wrecked in November. I...
Mike
MMakintrax@...
Apr 15, 2007 2:51 pm
35687
New to the group. My name is Dann, and greetings to all....Anyone familiar with s-glass and using the body panel in question as the mold? We did it on SCCA GT3...
http://www.dariusrudis.com/instructions/1989_Mustang_Weight.JPG <http://www.dariusrudis.com/instructions/1989_Mustang_Weight.JPG> Darius Rudis AOS Project...
"The Official Ford Mustang 5.0 Technical Reference & Performance Handbook 1979-1993" by Al Kirschenbaum, lists the weights and weigh bias for all the 5.0 cars....
Many thanks. Dann ... From: "Rudis, Darius (D.)" <drudis@...> ... http://www.dariusru dis.com/instruct ions/1989_ Mustang_Weight. JPG Darius Rudis AOS...
Thanks Mike. My big issue is this car was originally a 1986 4cyl no options hatchback. It was converted over to 5.0 T5 powertrain a year or 2 back by the...
No problem, welcome to the group. LX 5.0 Sedan, Manual Trans., 5.0; Total weight 3037lbs., Front- 1798lbs, Rear-1239lbs. Distribution % - 59.2/40.8. In this...
Well, since you offered, Mike, how about an '89 GT convertible 5- speed? :) One of these days I'll have to get it weighed to see where it's at now, as there've...
i haven't read the other folks' responses yet, so i hope i'm not wasting bandwidth here, and i hope i'm not dorking it up by missing something obvious, but i'm...
I did the same... What it really means is if you sit a PASSENGER in the seat of the car, the weight distribution in front seat distributes the 200# friend...
So based on those figures....and assuming they are correct, placing +/- 200lbs under the frt passenger seat area (provided you have no passenger), would...
I know moving your right foot from flat-on-the-floor to the gas pedal is 5# more on front left tire. ;) Not kidding. It was frustrating to get in/out of car...
I think the best modification for a course that the car is just too loose for is another passenger in the 150lb-180lb range. At least for my suspension setup,...
George Kokolakis
rgbcons@...
Apr 17, 2007 5:54 pm
35702
Rounding out my mostly street project I'm considering adding a couple of compact 8" sub woofers in the rear seat area. I think I can fit them where the cubby...
Actually almost no amount of passengers is going to get you to 45/55 F/R for the car except maybe 5 bodies.The stock distribution of around 60/40 means that it...
Yep...Time to invest in scales. Thanks all for the input. Dann ... From: photoracer@... Actually almost no amount of passengers is going to get you to...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
