Could someone with the tools look up this part number? 6L1Z-4947-B I'm trying to buy some clutches for my 8.8 and I want to know if these are the regular...
The part # bring up that it's a "Universals & rear axle - Rear axle - Differential - Clutch disc Clutch disc, 8.8" ring gear". Part Number Lookup Posted by:...
I'd like to get some wider track wheels for better tire support. I called FRPP about the OEM Wheels, but they were of limited help. If it's not listed on the...
It's time to do some spring cleaning.... 31-Spline C-clip axles from Moser Engineering #A883153 These forged steel axles came out of my 99' GT's 8.8" They are...
I run r58's all around. You will have no problems in front with your brakes and r58's. I run 96+ spindles with y2k cobraR brembos on the front...and...
Ditto. You can also run M179's on all four corners (with 1996+ Cobra brakes, the M2300K). That way the rears (1/2" wider track of brakes), and then 1/2" spacer...
Pictures available here - http://www.submariner.org/thepno95/Pictures/Mustang/oil%20pan/ I bought the pan from Armando back in March 2002. It's steel with...
I have the canton pan on my (351-based), 408 with griggs k-member. Same deal. The canton pan sat on the k-member. I ran some 7-odd track weekends that way,...
Here's a random request... Anyone out there have a '71-73 car with the rear wing? I think it came on the Mach 1 and/or Boss 351. I'm curious how tall the wing...
Actually I had more deflection with the 22+# thick spoke OEM 95 Cobra R wheels than I did with the 16# thin spoke SSR Integral A2 wheels. Then again cast vs....
Since their website is kinda stupid, they won't come up for a Fox Mustang (even if you select the 5-lug conversion option), but if you plug in an '05 Mustang...
Yeah, I'm in the same boat. I have a full set of R58s/M179s on the car now, but I think at least 1 of the M179s has an inch or so of curb rash. It would be...
What method did you use to monitor this deflection Kent? And keep in mind that most of those lightweight racing wheels will have a very limited lifespan. Scott...
Wasn't measurement it was sound. Going through Summit Point's uphill right hand flat out turn 8-9 sequence I could hear the left hand rear wheel's inner rim...
One more thing. I found that sound was rather unpredictable, since sometimes I would hear it, and other times I'd be too wrapped up in driving. I now carry a...
I'm not sure that's really conclusive Kent. First of all, you're talking about the top of the wheel, which is not the portion of the wheel that's loaded and...
let's not forget what the m179s were for...it was a way for fox cars with sn95 rear brake kits to play in the 95R game too without having the "too-wide-rear",...
I have been using 10th Ann. wheels as my track wheels. A little more backspace than the R58 so they fit a little bit easier. Definitely easier to have wheels...
Looks like I will have a set of the Steeda Ultra Light Wheels up for sale. 17 x 9 with the 28mm offset (5.6 backspacing I think....). I believe these are...
Actually in the case of the SN95 it is not the top of the wheel but the rear middle of the wheel that can get close to a welded area of the body in the fender...
I'm interested in them. Howard ... From: rrax-mustang@yahoogroups.com [mailto:rrax-mustang@yahoogroups.com] On Behalf Of Kent Gittings Sent: Monday, February...
Looking through the archives, it looks like a 255/40 R17 tire would be well supported by a 9" rim for road course use. It looks like that puts it in the...
Yeah, but a lot of us use 275s on the 9" rims in racing. All the 95 Cobra R cars used 275/40-17s on the track in IMSA Street Stock and Speed World Challenge. ...
I've gone the other way with that...I run 275/40/17's on my 9" r58's...that means that as per the other thread, I run these in front on my fox. it's tight,...
I have run both sizes on my r58's, open track only, no racing. And I feel that the 275s can take more abuse from my ham-fisted, amateur skills before they get...
