... buy an aftermarket adjustable tie rod kit. griggs racing is a good place to look. i wouldn't recommend using the '03 cobra struts, as they are probably ...
"And Ford only put the tanks in cars not licensed for street use (Cobra R models). Meaning in cars with no factory warranty." 2000 Cobra Rs are fully street...
V8Saleen@...
Sep 1, 2004 7:56 am
32194
My set-up consists of off-the-shelf parts from Dr. Gas, just as Skod mentioned. I didn't have a bender handy, so I wanted to make sure I got it right. I...
Whitehead, Scott (S.)
swhiteh3@...
Sep 1, 2004 1:17 pm
32195
... you'd be really screwed if they put the sound meter on the right side of the track at laguna seca. there's a 92 dB sound limit. -teddy ...
... The 4.2 is the stroked brother of the 3.8. I bet they would be the same. -- This looks like a job for me, so everyone just follow me, 'cause we need a ...
Not to mention the foot valve can get blown if the strut bottoms out. You need to get Fox length struts if your car is lowered much at all. SA Koni yellows for...
You can make almost anything "street legal". However if the maker clearly states the car is "not intended to be licensed for street use" or "does not meet...
Subject says it all. Please mention the RRAX - Bart ... _______________________________ Do you Yahoo!? Win 1 of 4,000 free domain names from Yahoo! Enter now....
oops, my bad. i was under the impression that the cobraR's -are- street legal...i guess not, huh? best, peter russell santa barbara, ca ... (Cobra R models)....
Geez, who knew? peter <pcrussell50@...> wrote:oops, my bad. i was under the impression that the cobraR's -are- street legal...i guess not, huh? best, peter...
Hey guys, Has anyone every installed a mini spool or had any experience with them. I've got the factory 8.8 in my GT and I've used up the limited part of my...
Unless this is going in a drag car or something you plan on drifting, I don't recommend a spool for any vehicle you have to turn at any speed above 10mph. ...
Like several have said that doesn't stop people from getting them tagged for street use. Really depends on how strict your state MVA is and how they handle...
... definatly what ... yes! useless/dangerous/foolish on a road race/autocross/street car....and not neccessarily in that order. i guess some of us have some...
1966 289 Ford Mustang FS I am moving and don't have room to take this Mustang with us. There's a ton of detail on the site. It's a restoration in progress. I'm...
Hey everyone, I've been outta the scene for a bit- ever since I gave up my 5.0 after the accident, but I've been still reading the posts here and there. Here's...
I have a friend (Dave) that put a che*y in a 240. I don't recall what he did with the rear diff to make it survive. It fit alright, but if I recall there was...
Yeah, I know a ton of people who did a 327/305/350 swap, but I'm a ford guy :) I just wish a 4.6 DOHC fell into my hands...ooohh! I heard the 5.0 sits better...
The Mark VII's used the same 5.0 H.O. motor as the Mustangs. Nelson 1990 Mustang LX 5.0 http://fiveoh.homestead.com http://home.comcast.net/~lxfiveoh ... From:...
Hey, auto guru Pete Brock, while working with Datsun/Nissan in the 71-72 time frame, came to Hawaii where I was stationed at the time and built a couple of 289...
... I would like to respectfully disagree. In the earlier days of road racing Mark Donahue did some quantataive testing in this area. With the old Penske...
For your entertainment, here are a couple of links for a sweet V8 240Z with a *hack* blown, injected 350. There are pictures and a couple of videos. Later. ...
I think we can agree a locked rearend or even a spool works great for go, but I believe it would be seriously flawed on the whoa part when cornering....
... I do agree with you about most of that, but lets face it that is the time that you are dealing with weight transfer to the front and the outside. Getting a...
Hey guys, Thanks for all the great thoughts and idea's. It leads me to another question: Now with the modern parts available for the 8.8, is it really all that...
Nope, never used one, because I was told they were hard on axles under braking. Actually that is not 100% correct, either. It was welded spiders that were...
I'm running that much torque through an 8.8 with almost no mods. Basically a good diff and 31 spline axles is it. Of course, I'm road racing and the loads...
