... From: "John George" <john.george@...> Reply-To: rrax-mustang@yahoogroups.com Date: Sat, 29 Jun 2002 17:33:44 -0500 ... This is because the SN95...
Robert King
gt40@...
Jul 1, 2002 2:39 pm
19738
Ran across this today while looking for cheap alignment tools... http://www.advancedracing.com/gifs/bumpa.gif This is something almost anyone could easily make...
Robert King
gt40@...
Jul 1, 2002 3:41 pm
19739
This is a neat idea. It seems that a few of his statements on the picture are a little mixed up, but the idea is right. First of all, a simple magnetic base...
Whitehead, Scott (S.)
swhiteh3@...
Jul 1, 2002 4:14 pm
19740
Notching the strut hole a 1/4" to allow the spindle to pull inward is worth -1 degrees. Cheap and it works. ...
OK, I've got the front coilover setup for the GT now, and the rear weight-jacker control arms should be delivered today (thanks, Doug!). Soon, after all this...
Robert King
gt40@...
Jul 1, 2002 5:31 pm
19742
Just ordered a "Smart Camber" setup the other day for the car. Does anyone else have or use one of these gizmos? In case you're not familiar with Smart Camber,...
Robert King
gt40@...
Jul 1, 2002 5:36 pm
19743
I'm preparing to install my new Motorsport rack and I thought I would go ahead and replace the pump at the same time since it's old and leaky. Summit sells a...
Robert, I have the smart camber guage and it works great! You will like it. Doug...
douglas.a.valley@...
Jul 1, 2002 6:33 pm
19745
I am using both the AGR pump and rack. I am very happy with them. I have not had any problems with them yet. I have had them on the car for about 2-3 months...
Robert- Let me know how you like it. I've been considering replacing my Halibrand with a Smart Camber gauge. One thing - put the car on a TRULY level surface...
Whitehead, Scott (S.)
swhiteh3@...
Jul 1, 2002 6:40 pm
19747
From: "Whitehead, Scott (S.)" <swhiteh3@...> Reply-To: rrax-mustang@yahoogroups.com Date: Mon, 1 Jul 2002 14:40:11 -0400 ... Will do. ... Which brings up...
Robert King
gt40@...
Jul 1, 2002 7:25 pm
19748
Water is a great equalizer. It tends to run to equilibrium. So if you get some long clear hose, you fill it solid with water, and then match the water level...
Rudis, Darius (D.)
drudis@...
Jul 1, 2002 7:52 pm
19749
Buy four cheapo clear plastic cups. Cups that have some ribbing around them work well, because they give you some reference points. Drill a hole in each and...
Whitehead, Scott (S.)
swhiteh3@...
Jul 1, 2002 8:20 pm
19750
I just did this last week. I made a liquid level with a 20' roll of 1/8" tygon tubing, water, food coloring and some tape. I paid about $3.00 for the tubing at...
Use an 8 foot carptenters level or a six foot carpenters level is you have a long and regid straight edge....
douglas.a.valley@...
Jul 1, 2002 8:35 pm
19752
Went to the Dallas Porsche-sponsored AutoX last weekend in the rain. I discovered that my car has way too much power for wet conditions, as my times indicated....
... suspension with zero toe change and zero camber change. Think about what happens in bump. As the mirror moves up with the hub, the path length from the...
... tail pipe. ... right. ... there are two different headers? ... Your intake manifold may be leaking water from the crossover into the runner. Pull the #5...
Thank you for all your responses The plugs are brand new. They are the double platinum BOSCH plugs. I went out earlier today and it didn't smoke at all, but I...
I just had my brake rotors turned because they were warped. It felt like my brakes were fading and my technician told me that I need to sand the brake pads...
... i've been using mine for years, and it hasn't failed. just one data point. ... opinions will vary. have you seen the sizes of the oil passages in the ...
I would use anything from 50-100 grit. You really can't mess it up. The first few times you hit the brakes will wipe out the scratches if they are too heavy....
Thanks for the info Carlo. I work at my father's Ford dealership and they just turned them for me while they were working on other stuff. I told him that I...
Which mounts are you talking about? Energy Suspension or Solid mounts? Andrew Bryce Sr. 1987 LX Cobra Brakes http://photos.yahoo.com/mrphoomf ... From: Saman...
Thanks for the help, Ron. That's the first time I've seen info about specific recommendations from the manufacturer. Just out of curiosity, how did Mocal come...
Scott, you're one of the people I really wanted to hear from, seeing as you're running a combo very similar to what I'll be running, and you've been pretty...
Yup, still waiting for those track results, man! I'm really curious what kind of temperatures you'll see once you get an oil temp gauge hooked up. Pat Olsen ...
