Hi guys (from the lonely Rokon owner down under); I am now right into my restoration of my RT 340 '73, and need a route sheet holder. I have been slow on...
heavier springs in the forks. also a good set of shocks in the back really help. you can get a decent ride with the stock forks with a little work. the only...
Can anyone give me a list of the tools in the tool bag? What about the dimensions of that 2 pronged tool? Anyone got a spare route chart holder? It's all I...
Ebay has a flat tracker for sale: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll? ViewItem&item=4600003765&fromMakeTrack=true Just a warning, seller has no...
Jim, is this a real flat tracker? what is the bike worth? would this bike make a good 1/8th mile speedway bike? Brian B [Non-text portions of this message have...
In comparing this to my brother's Rokon flattracker that resides in my garage, it is fairly similar. The rear fender, seat and exhaust pipe look the same,...
The Rokon on eBay is a factory prototype. The guy said that there were 3 made, but there were at least 4. I have a frame with the serial number MDR1004. It is...
Brian, re: your question- "... would this bike make a good 1/8th mile speedway bike? ..." I'm not sure of your terminology 'speedway bike'. Being an ole...
All, Happy New Year! I am almost completely done with my Rokon restoration but am looking for a headlight. It's one of the last things that I need to finish...
Hi everyone, Happy New Year, new to Rokons and this site, I decided to pull an old Rokon out that we had in storage to run at the AHRMA Bike Week National in...
Hi everyone, Happy New Year, new to Rokons and this site, I decided to pull an old Rokon out that we had in storage to run at the AHRMA Bike Week National in...
Hello Jack and welcome to the group ... look forward to you posting some pics ..... engine parts can be bought from Central Snowmobile ..... try to get us...
... Thanks for the warm welcome Brian, no numbers on the frame or motor, just received the frame back from the sandblaster and could not find any markings.......
Hello Jack, ... Wow, that sound pretty ambitious. Good Luck! ... Sounds a lot like a GMR to me. Pictures would help alot. The cast wheel/spoked wheel sound...
... the front and mounted new rubber, blasted and painted frame, lined tank to cure leaks, forks cleaned and new seals installed and NOS Petty plastic...
Jack, Dennis Kirk has pistons for several old snowmobiles in stock. Somewhere in an old post, there is a note on which snowmobiles engines are the same. I...
Looks like I will be needing a seat for my bike, RTII style, is there anyone out there with one they would part with, any condition is fine. Thanks, Jack...
Hi guys, uploaded some photos of the bike I am putting togeather. Questions: Is it a GMR?? What are the four holes for between the motor mounts hole and the ...
Please look under "Jacks Rokon" photo album, I figured out how to set the album up. Another detail of note. The left side pipe mount has been cut off and ...
Welcome to the group. Oversized pistons are very hard to got. It is best to have the cylinder sleeved back to standard. You can get standard pistons....
... Yes and No. The frame is a GMR. The swing arm looks like it's probably off of a 75 MX. The front mounts are the stock MX mounts. The rear mounts were...
... The GMR pipe was routed in the tunnel under the engine and reduction box and exited on the left side with protectors on each side of the tunnel. When the...
... mounts and gussets are not factory, diff gauge metal, poor quality welds, hand fabricated. Is it possible to get an axle to pivot measurement? Where can I...
Can any one suggest a 19 inch front knobby that works, i have tried an nos metzeler with out much luck. The rubber is to hard, thats what happens to a 35 year...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
