Hey guys and girls, Any help or direction would be appreciated. I am in need of a 3rd over for my RT. A 78.60 sachs. If a part number were listed it would be...
I say sleeve the jug and run a standard bore piston...or sleeve it and bore it to match whatever piston you have. Ernie **************Make your summer sizzle...
first and second was all they ever made, best bet is to sleeve and use the std pistons, of which there are plenty don ________________________________ From:...
My memory is failing me in my old age but... Did not the Maico 500 use the same bottom end? If so, is there a possibility there? I'm sure I'll hear from...
Marc, I think you're referring to the Rokon 500 prototye, that had a Maico 501 top end grafted onto a Sachs bottom end...this was done by a machinist in the...
If anyone is interested in the "RX500", go to "rokonron.com" and then "RX500"...AMAZING!!!! although, I'm not sure I want to "pull start" a 501cc!!!! Dave V, ...
Hi Dave, My name is Keith and I am new to the Rokon group.I live out in California and have been collecting Rokons for the last couple of years. I raced a...
Hello, I am in CT, and am a long time Trailbreaker rider. I finally bought a nice low miles RT340. Unfortunately, it sat with fuel in the tank, which dripped...
Another way to "help" the chemicals do their job is to apply heat. A heat gun works wonders. Helps to soften the sludge and deposits. Perhaps you have a local...
Try using RC model airplane fuel. I've used it on carbs and it works great at getting off the varnish. In a message dated 7/2/2009 10:05:43 P.M. Central...
skoshi@...
Jul 3, 2009 3:42 am
4065
Hal,  if the engine is out and cylinder off, carb clean is your best bet. I'd pull the crank seals and just keep pouring it throughflushing everything out,...
Go ahead and split the cases...with no transmission to worry about there is very little difficulty...very possible the crank/lower bear is rusted up and the...
I have most of a 340cc Rokon; frame, tank, engine, transfer case, brake stuff, forks, etc., that really needs a new home. I am located about 50 miles North of...
Hi Doug, If engine available would you send to England? Thanks Alex To: rokon@yahoogroups.com From: doug.alber@... Date: Tue, 21 Jul 2009 23:21:37 +0000 ...
I would like to sell all the pieces as a unit, but having received no offers as yet, let me ponder on your request. BTW, how would I go about shipping to...
Doug, not sure what my wife will say....but I'm interested. I was a Rokon dealer in Buffalo many moons ago. Can you send a couple picsof what you have? Bing...
Ok, I give in. I am also interested. If no one buys it, please let me know, I will take it. I have too much stuff already, what's another Rokon? Thanks, ...
Oh, I don't have a wife, so no worries. I have plenty of barn space too. ... From: WA Bing Sherer <basherer@...> Subject: RE: [rokon] basket case To:...
Hey guys, I just picked up a mutation- a Rokon MX with a Sachs 360. Yup, 360. Anybody know what it is? The bottom end is standard Sachs, but the top is...
Jim Can you upload a few pictures of this MUTE ? We all would like to see it. Mike Murphy In a message dated 8/14/2009 7:06:21 A.M. Eastern Daylight Time, ...
Here are some pict's of whatever I have. Look in the second group of albums for " Rokon MX with A Sachs 360 ". The through bolt holes were elongated and a...
Here's a Rokon at the starting line at Vintage Days in Mid-Ohio. Even though it was the smallest engine in the open class, the torque convertor really "put it...
Certainly looks like a Yamaha RT 360 cylinder and head to me. The holes with slots on the piston is quite bizarre. Perhaps the holes and slots were to deliver...
Greetings everyone, Does anyone know the fork oil capacity in each leg of the early Betors? I bought my Rokon with me to Baton Rouge and forgot to bring the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
