... its not going to be easy even if you used the string method, i used a strong flat piece of sharpened metal bent at a 90 degree angle to cut under the...
Are you interested in selling the sliding window? What condition is it in? ... From: CR Thompson To: Rampage Forum Sent: Tuesday, March 31, 2009 11:12 PM ...
I have a brand new slider rear window, still in the box it was shipped in. I ordered it many (10?)years ago and never got around to installing it, especially...
I don't know if this will work, but here is my attempt to send pix. If this doesn't work, perhaps someone can advise the best way to upload pix and also,...
Has anyone tried painting their Rampage with a roller? I was told about a discussion group for cars that had this topic come up. I was skeptical at best but...
I added 6 new pictures, one of the rear of my donor Rampage, and 5 of the damage on my black one. http://home.comcast.net/~dodgerampage/site/?/photos/ ...
I would buy you out but the wife just put the kibosh on the whole idea. She's so unreasonable. The back of your 82 looks like the front of my 82 (except mine...
If you have 2 extra doors do you possibly have window scrapers or door seals that you are willing to part with? my rampage sport could really use some.. ... ...
I finally got some pix of the slider window uploaded to a photo album at the Rampage Runners site listed under "Dar's '84 Rampage" on the 2nd page of pix....
Hi , Does anyone know if a Holly 5210 will work on the Dodge 2.2 Engine? Everything on it looks the same as a 5220 which I have. It seems to be for GM...
That is all that 'needs' to be changed. But the Shelby Charger and GLH that had 15", also had 5 bolt hubs, larger vented disk brake, and unique knuckle with...
Oversize tires/wheels can throw of the speeedometer. If it does, you can change the gear to one with less/more teeth to compensate. Charlie ... From: Jim To:...
Ok, I found my "dream" wheels. They are old school slot mags. Although the bolt pattern is 4x4.0" (which is 101mm), they are close enough to fit our 4x100mm...
In decreasing the back spacing of the wheel you will move the center of balence outward, this will transfer more of the weight of the vehicle to the outer...
They will handle ok but you need to file the bolt pattern to 110 mm, it wont take much and use a washer on the mag lug, make sure you check the lugs abot the...
Where did you find 13" Mag Wheels? I didn't think they made them. ... From: Dennis Fournier <df4nier@...> Subject: Re: [Rampage Runners] Wheel Question...
-Where did you find 13" Mag Wheels? I didn't think they made them. Got kinda lucky. These were made in the 70's for Vegas and Monzas, who were about the only...
Does anyone know if the exhaust pipes from the cat back are the same for the Omni and the Rampage? If not, can you tell me what the difference is and if I...
Jeff: The pipes are not the same. The Omni pipe won't clear the Rampage/Scamp leaf springs. Any decent exhaust shop can probably bend you anything you want....
Ya, I was going to go with that approach until I saw a 3" cat back system for l bodys for $150. So, I started looking for the same thing in 2 1/2" and all I...
What parts do you need? I may be going back to a wrecking yard where there is an 82 to get a few parts myself. And where are you located? Charlie Sacramento ...
Hey Charlie, I was going to post about a small part I needed also, and I think it is Rampage/Scamp specific. I need the piece of plastic that covers the seat...
I will look for that part when I go back out and report back. Charlie ... From: Jeff Lawley To: rampagerunners@yahoogroups.com Sent: Tuesday, April 07, 2009...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
