... rev ... I finally go around to working on the acceleration issue. It was the fuel filter next to the carburetor that was clogged. I changed 2 filters, one...
Since I am in the process of rebuilding what I think will be the entire front end with all steering and chassis components, I am going to replace the sway bar...
generic auto parts houses dont sell sway bar bushings by application. they just sell generic ones that fit by measurement. if you want to get the bushings from...
There are a couple of different starters used on the Rampages, from what I have read (Bosch and Nippondenso). They are slightly different in appearance and...
Eric, thanks for the info. I found a nice polyurethane set by Energy Suspension made specifically for our application. The inners and outers are different...
Yup, they both will bolt rite up. Been there, done that! BTW, If the one rear mounting lope on the starter won't match up with that little hanger piece. My...
i'd be careful about just picking one at random. check the mounting and make sure you get one that has bolts and studs in the right places. some of the...
I have a 1984 Rampage with the rears already swapped over to 5 bolt with parts from my 1986 Shelby Charger. I want to swap the fronts out to start the...
You might have to swap out the lower control arm, the BJ might be a different size, both the pin size and the unit diameter. Good time for some poly bushings. ...
I am eventually swapping everything. But I want to get it legal, so I can use it as a truck to take the drivetrain, and k-frame to a wishy washy and de gunk...
Hi Ed. Ah couple things I found when I did mine. The ball joints were tack welded to the swing arm! Not sure if Mother did it to all of um' or whether mine had...
Hey everyone! I found 2 cars of intrest and I was wondering if it might be a match...The first, 1984 Rampage 5spd/stock 2.2 the other is a 89 Dodge Daytona...
Well Ed. If you're using those Shelby Knuckles you should be good tah go! I used a '90 LaBaron for the swap. That's where the issues came in! I'm runnin' ...
Drive train is swappable with wiring changes, but pretty much everything else isn't without extra work. The Rampage and Scamp share almost every part except...
Cole, Don't want or mean to Poo Poo your project, but you better get TWO Daytona's! The ground effects between the wheel openings on the 'page is longer! ...
If anyone is looking, I have the RIGHT side ground effects pieces. That is, the small piece that came off the right fender, and the looooong piece that screams...
$10 plus shipping. I will take a picture today and shoot it to you. Thanks Charlie ... From: Jason Jordan To: rampagerunners@yahoogroups.com Sent: Thursday,...
ok, I will wait to see the pics. ... From: CR Thompson <illuminance@...> To: rampagerunners@yahoogroups.com Sent: Thursday, January 24, 2008 3:51:54 PM...
He's right, I have ground effects 0n 82 Rampage and they are longer then the ground effects off a Daytona, I've been told that the ground effects from a...
I haven't had much input for many years even though I have been in the group for years. I even have my 83 posted in the picture section called "ted's rampage"...
thanks guys! I'll probably just pick up the daytona for $300 and drive it til the wheels fall off! Cole Robert Abel <abelrc@...> wrote: He's right, I...
I know of two guyz in your backyard. One with an '83 'Page and one with four ah them lil' puppy's. And I'm 2400 miles east of you! Charlieeeee, you out there? ...
