Hi Charlie; bookmark this site: http://www.thedodgegarage.com/ Down on the left side under FWD Tech, there¹s a ³Transaxle guide² with good info Bob Brandon...
Go to a rim shop that has computer pictures of different rims, pick a small black truck, no Rampages available, and see what they liik like. Thats what I did...
I just did this exercise myself recently, and went with the black rims. My paint color is black, and it just looked a lot better IMO. I went with RWD rims...
I suggest you convert to 5 on 100 and go with 15"x7" black mesh style wheels from a Pontiac Fiero GT. I will be using the gold mesh Fiero wheels on my white...
I ordered a 2.2 long block motor about 5 months ago, and only now am getting around to installing it. Today, I removed the flywheel and clutch from the...
are you sure its 7? i've never heard of a 7 bolt crank on an 8 valve engine... i think some of the DSM cars had 7 bolt cranks. Pretty sure if its the later...
Yep, I believe that 85 is 6 bolt, and 86 is 8 bolt. ... From: slppryjim To: rampagerunners@yahoogroups.com Sent: Tuesday, April 29, 2008 7:21 PM Subject:...
Thanks everyone for your help. Looks like another $60 towards the project...anyone looking for a perfectly good SIX bolt flywheel? ... Charlie ... From: Robert...
Hai friends The fuel price is going higher day by day makiing it hectic for all to spend on it . We should take sufficient steps to control the fuel usage . We...
I might be... But I don't think the 6 bolt flywheel will use the 8 bolt's pressure plate. I am swapping from 1984 carb/auto to 1986turbo/ manual. I'd like...
I have a 1982 Rampage and a 1986 Dodge 600 with a turbocharged motor and auto transmission....their both complete. I'm looking for an easy wiring conversion...
You would ideally want a complete Shelby Charger Turbo dash and underhood harness, but the 600's should be pretty close. The pre 1984 l-bodies have slightly...
Hello all. I just found out Yahoo changed me to "web only". Very annoying! I thought the list was really slow. OK, enough venting. I am putting one of my...
Yes, but not 15-20 years. ... From: James To: rampagerunners@yahoogroups.com Sent: Thursday, May 08, 2008 7:43 AM Subject: [Rampage Runners] fiberglass front...
Thanks Dave, that is the old site I couldn't remember! They show a front clip under "Omni". ... From: David Salamone To: rampagerunners@yahoogroups.com Sent:...
... They're based in the same city I'm in (as well as Dealer's Equipment). For a nominal fee (cheaper than regular shipping) I might be able to pickup &...
I have just removed the steering rack (power) from my 84 and put in a rebuilt one. Neither the manual I have nor the instruction sheet with the rack mentioned...
Either way works, but I prefer to preload it using the supply tube. If you turn the steering wheel after doing this though fluid may squirt out. Best Regards ...
A while back I learned about an older man about 30 miles from me with a bunch of cars, including several Rampages, but he didn't want to part with any of them....
Dave..I'm interested .. can you send me the info for contact.. bill _____ From: rampagerunners@yahoogroups.com [mailto:rampagerunners@yahoogroups.com] On...
Hello, Would the owner of the rampages be willing to sell any parts off the rampages? I've been looking for a part of bed rails for at least a year. I live in...
