i've got my valve lash set to stock clearances, my cam card says i should set it to much wider clearances (inlet .014 exhaust .016). i've been doing some...
you got the tighe 25/65? my cam is similar (0.002 less valvelift) and its recommended clearances are 9/13. stock is 8/12. i asked my engine builder, he...
i'm individual. i have a crow cams 740 grind. i posted the specs on it a little while ago. i got clearances (on the cam card) of 14/16 which is pretty big. i'm...
my cam card says 0.015" i run stock clearance. i would recommend you check the clearance around the entire base circle to see where the clearance is the...
i recently picked up a 74 that has a 4age w/ side drafts but it might have a blown head gasket and whos to say something else my be wrong too, i dont know...
Head gaskets not that big a job on a 4age. You could probably leave the intake stuff on there, just disconnect throttle and fuel lines.. Take off exhaust...
... oh yeah i remember now stock clearances should be fine, try one or 2 thou over and see how you go. do you do alot of highway driving? when i went up to...
hi I'm looking for a 5k or 7k engine for my corolla if you know of any one that has one for sale please email me asap. i have seen toy-mods has one but looking...
this might be a stupid question, but what would the effects of fitting say a dgv carby 180 degrees, so the primary barrel is nearest the motor. would having...
Hello everyone... My ke55 needs a wheel upgrade..... Ok, yes I'm a newbie, no, I've never had a 'rolla before.....I'm an ex-V8 chevy & holden boy... Now that...
Jones, Lucas SAL-OCC349
lucas.jones@...
Jun 3, 2004 3:21 am
19079
good rust free doors wanted (both sides) any takers? ab...
it's not really a stupid question at all.. i considered doing this with mine, but in the end, i figured i have two large carby barrels, squeezing down into a...
... you want specific rims? or just any? what you want is 4x114.3 stud pattern, 5.5" or 6" wide, and i think (from memory) about 90-95mm backspace (don't quote...
Rob, that is how I have my DGV setup. It relates the ports in the manifold and adapter plate better this way, not to mention the fuel, choke and accelerator....
gady mate havent lowered my rolla but ive had 205/60 r14 on the back and 195/60 r14 on the front im sure u could lower the car using these types of tyers but...
G'day Stew... Nothing specific (at this stage).....Yes, I realise off-sets etc will affect my choices, but put it this way: I could safely fit 17x8's on my V8...
Jones, Lucas SAL-OCC349
lucas.jones@...
Jun 3, 2004 3:59 am
19085
Thanks mate, I'll check it out.....Of course I'd be checking with wheel/tyre places before going ahead, but you cant beat experience, which is why I asked this...
Jones, Lucas SAL-OCC349
lucas.jones@...
Jun 3, 2004 4:01 am
19086
... I'll second Stewart's comment here; definitely no more than 185 width if you want it to be reasonably safe and driveable. Our KE26 rubs one of the rear...
Thanks everyone who replied....I appreciate it.... I will go for 14" rims, 6" wide at the most.... Cheers, Lucas ... From: john slee...
Jones, Lucas SAL-OCC349
lucas.jones@...
Jun 3, 2004 4:24 am
19088
13x7jj hotwires.. should be cheap, and plenty wide. Good offset too. They should sit under the guards in the rear, and if a bit wide at the front just pull the...
7" wide huh??? Hmmm..... I want an aftermarket wheel, a nice, open 5 spoke rim that will look great when its lowered..... Thank you all again.... ... From:...
Jones, Lucas SAL-OCC349
lucas.jones@...
Jun 3, 2004 4:27 am
19090
I guess it depends what you can get away with for the authorities. 14s are nicer then 13s because you can get a lower profile tyre. As Stewart said, 55s. Karl...
Thats a damn good question. I agree with you about the cables being easier to get at, but wouldn't the accelerator cable be pointing towards the battery /...
I have 13x7, it only just clears the strut. ... From: "Jones, Lucas SAL-OCC349" <lucas.jones@...> To: <oldcorollas@yahoogroups.com> Sent: Thursday, June...
thats interesting. when i had my dgv on the corolla it had the primary on the passengers side. the throttle cable only just fitted (only just cleared the oil...
Ok guys, here's the drill....... The 4k in my ke55 has had some work, I've discovered, and is pretty much beyond any more working..... Time for upgrade!!...I...
Jones, Lucas SAL-OCC349
lucas.jones@...
Jun 3, 2004 6:20 am
19095
i'm pretty sure it's illegal to fit anything wider than 6" to a corolla in australia. i like wide tyres, they make your car look awesome, and stick like glue...
