The vehicle S/N is stamped on the dash data plate. That is the vin number. You should have had this on your trailer also. I have a 1967 M151A1 and a 1967...
Hello, MMP, Ex Air Force aircraft mechanic here, brief mechanical experience combinning 2 salvage Mutts to make one. Looking for a beater/driver Mutt. Sure I...
Folks, I have decided to sell my MUTT. You can find more about it at http://www.g503.com/forums/viewtopic.php?p=728393#728393 . Done alot of work on it since...
Hello does anyone know of a part number I can get wheel bearings off the shelf at a auto parts store locally. I would think they were nothing special....
... off ... looks ... need ... i found them at allied bearing in tulsa, you shoulb be able to find them lacally. there is a number on the race, and the bearing...
It is 99.9% certain you can get these off the shelf at any good bearing supplier. They are standard taper roller bearings although I don't have the actual...
I bet your local bearing place charges more than $15.00 a set....That is 2 cups and 2 cones) That is all I charge, plus shipping. Good luck beating the price...
Here's where you can get the parts you need for alternator repairs: www.southernautomotive.com Kurt Lesser ... Stewart that rebuild them and see if I an get...
If you have the slave recepticle fitted to the jeep read the voltage there. It's connected to the batterys through heavy cables and is a nice safe place to...
I don't know much about the Mutts and therefore have a couple questions. I am looking for a mutt and have 2 not too far away. One is a 62 uncut but no title....
Every state handles it differently. All things considered, everything would be far simpler if you go with the one already titled. As for the 95 year, many...
no mutts were made that late, probably an error. GR Geoffrey Randolph Webster Maison du Bois 22 Route de St. Francois Grasse 06130, France {33} 6 85832334 ...
Could it be an ENCORE or Growler? ... From: GR Webster <grwebster@...> Subject: [MUTT Motorpool] Re:Title questions To: muttmotorpool@yahoogroups.com Date:...
OK, not a Ford Mutt, but you can tow your Mutt with this Ford Ranger pickup. Step bumper with tow ball. It features the 2.9 V-6, 5 speed trans, 4 wheel drive, ...
Some time ago there was discussion on the site concerning a company in Saigon VN that was "restoring" M151s. Does anyone remember the name or web address. I...
I have a m151 1962 model for sale if anybody is interested. It runs I use it around the ranch. It needs some brake work. Jeff Andrews 936-348-9777 Â Â I have...
I'm asking $2,750.00 for it. The motor, transmission, and four wheel drive are all solid. It doesn't look like it had been cut in half and welded back...
Reno, This was put out on a list some time ago, I haven't used this part but give it a try: NAPA BR35 (LM501349/LM501310). Txdoz Walnut Springs, TX 1972Â ...
If you need anything else let me know. Thanks, Jeff Andrews 936-348-9777 Home ... From: v m <seraphinous@...> Subject: Re: [MUTT Motorpool] m151 1962...
Madisonville, between Houston and Dallas. I appreciate the reply back on the bearings but I was trying to reply back to the other gentleman that asked for the...
I would get bearings from a M151 dealer the reason is they have the correct parts while some may cross to civi stuff there are slite differences that can...
Thanks. I was trying to reply back to someone else who needed them. Somehow my reply got put in with their question. Jeff Andrews 936-348-9777 Home ... From:...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
