Does anyone have any ideas if there is a cross reference from Military parts to civilian? I just picked up a 1964 M151 and wanted to replace the fuel filters....
I by no means came up with this myself, many have added to the list over the years. If you have any to add, please shoot me an email. IHC ... Civilian parts...
There is allot of NOS and you can get many aftermarket stuff like that from a local parts store. As far as the fuel filter I suggest you use a glass filter in...
Thanks for the information, Jay ... From: Flyboy740 To: multimotored@yahoogroups.com Sent: 3/9/2006 7:11:29 PM Subject: [MUTT Motorpool] Cross Reference...
Hello esteemed list. I have a number of pinholes in the A2 body that I do not wish to completely cut up and replace with new steel patches. If I grind the...
I think bondo when done properly is a better product. with panel hard to find using a little filler and the original panel is better than cutting and using a...
I am wondering if you have enough metal to weld the holes shut? A good mig welder and some time spent welding and you can seal up the holes and then grind...
Hello, gang, I've replaced my distributor and lost my strike-up line for the distrib angle. I know that I have my timing mark set correctly, and that the...
This was taught to me by a motorpool sgt. Take your first two fingers and hold them up againts the oil filter. Turn the distributor till the little bump out,...
... wrote: Hello, gang, I've replaced my distributor and lost my strike-up line for the distrib angle. > Help greatly appreciated. Angus>> If the distributor...
Hello esteemed list members. I need to acquire a Title and Registration for my '72 M151A2. I am a Georgia resident, but planning to move to Washington state...
That sounds like a logical plan to me get the title and tags in the state you live in then just transfer them into the new state when you move. Just like your...
Mike When I got my MUTT I was in GA and moving on to another state. You dont have to go through any title co. You can do it all right there in GA. What I did...
brett fehrenbacher
Brett_ty@...
Mar 18, 2006 3:57 pm
5812
I live in WA state and own a MUTT. Make sure you title this as a Ford Jeep. WA will not title one as a MUTT, they say it is a vehicle that is not safe. Lots...
Hello to all, I'm trying to mark my 1964 M151 with the proper markings for that period. The only reference I have is a 1968 reference manual, which talks...
I can't help you on the markings other than what I know from doing many of them. But I can tell you that the correct color is 24087 Semi-Gloss OD Green. The...
If you check the message history, I had the same question some time ago. someone gave me the publication number. On the hood you use 3 inch letters. The tank...
Ladies and Gents, I have gone through this same thing in the Republik of Kalifornia as well........since then I have sold my Mutt, but I do remember the entire...
I'm a new member to the board and was asked by the moderator to post a picture of my Mutt so I just did. See "Cowboy Mutt" in photo section but purist be...
Hello List, I have a 1985 M1028 CUCV. This was the commo truck and I'm thinking about giving up. I've come to a point in my life where I want to put all my...
Good call Top, I forgot about that, Ford 2-door jeep. Brett ... _________________________________________________________________ Don’t just search. Find....
brett fehrenbacher
Brett_ty@...
Mar 19, 2006 4:37 pm
5821
Hello I am finishing up my rebuild job on a A1. I just put in a A2 fuel system. Before when I ran the electric A1 system It ran OK. Now I have the new system...
Get the manual out and do a valve adjustment. I have found that many of the problems your discribing are because the valves are not adjusted properly. ...
I believe Top in all that is jacked up at DMV, but how does this get entered, Ford-Jeep.......the idiot behind the counter only has drop down boxes to choose...
Has anyone used an engine from Richard Miller in Alabama? I want to buy a good M151 engine in a couple of more weeks.. any good experinces? Any bad ones?? I...
Hello esteemed list members. I will need to have my M151A2 transported from 30306 to 98225 this summer. Is anyone on this list in the business of hauling or...
Hello, You might check MV mag or Supply Line for transporters. But I flat tow my M151 all the time with no problems. Joe ... Joe Kaiser Leather Naturally For...
Does anyone know where I can find a M151 (1964) Weight and Dimensional Data Plate? I can find A1's and A2's but I got a straight M151. Second question. I'm...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
