Yes i have a 68 charger buddy seat im selling out of my 68 and i also have the mounting brackets for it also,the color is green and it has no rips real nice...
Just got my '70 Coronet back together enough to run, but still need to do some adjusting. That sheared bolt from the intake manifold swap was a nasty...
I'm checking the plugs now and was wondering what I should gap them to. I can't find my shop manual, but I think it used to be in the .035 to .038 range (1970...
... .035 is spec. Without a GOOD ign system(MSD, big coil etc.) no need to go any bigger gap. Glad to hear your kids are involved, they are the future of the...
I am really gettin tired of all the same old stuff online now days, so i was pretty suprised when i saw this http://www.alwaysonalwaysgood.info/sovw . Looks...
sherry-heath761@...
Apr 18, 2006 6:08 pm
3133
...somebody tell a joke. To fill the quiet, i'm throwing a question out there. When I bought new plugs for my Coronet, I chose Champion. This took nothing...
... Yeah, I hear ya, its just to hard to say, "infineon" I still think of it that way somewhat myself. Sparkplugs.....If they are working, then another "type"...
... Yes Jake, I would try replacing the floor mounted dimmer switch. A new one should be in the $20 range. You have a test light, right? If needed I can walk...
Hey Dan! Don't worry, your keys are safe and I will try to quit flaking on sending them your way. I was in San Diego the week after we went to Medford and on...
Wow, new leaf springs make a measurable difference. Rides a little more like a truck over the bumps, but I like that. Accelerates better, as it isn't sitting...
... Cool! Yeah its nice to have a more "matching set-up" now as both ends have more spring rate. Yeah, flippin the hangers does change the pinion angle more +,...
arrive yet? Wow, new job...that is cool that you can move about if and when you need to...hooking up with a good shop is probably the key, yeah? Just dump some...
arrive yet? Wow, new job...that is cool that you can move about if and when you need to...hooking up with a good shop is probably the key, yeah? Just dump some...
thanks dan for your help i did need a new dimmer switch after all also needed new head lamps both filaments were bown out on the low beam lights Jake...
Hi! I have been digging into a problem with no spark and just discovered that, when turning the engine over with the starter, the distributor is not turning....
... discovered ... distributor ... And, ... with ... that ... there ... of ... still ... Karl, back up. Is just the dist. not turning, or the cam/valvetrain. ...
Hey, just took your advice and checked the valves. I pulled a cover and watched as i cranked... no movement whatsoever. This does explain why it sounds...
Hello! I'm sorry i disappeared, but I've been swamped at work and with some important family issues. Besides, it's been fairly cold out to be working without...
... Hey Karl, thanks for the update. Been wondering if it survived or not. Thought perhaps I scared you off with bad news. With the new chain you should be...
Hello! I just wanted to drop you an update. My Coronet is nearly put back together; there was valve damage on several exhaust ports and a couple of intake...
... You did put a bead of seam sealer where the fenders bolt to the inner fenders, right? Thanks for the update!~Dan ... couple ... work ... neighbors ... so...
Seam sealer? Whoops, I wasn't aware of the seam sealer, but I can still work that in as the front bumper is still partly disassembled, and the fender bolts...
This evening, i finally got to fire it up! I still need to keep adjusting my fuel mixture and take care of a coolant leak (tiny puncture on a hose) but it'll...
Hi, Dan! She's running nicely now! The engine is still mostly stock, but it's amazing what a little cleaning can do to make a 318 look more impressive. I...
... clattering pretty good in the video, has that settled down? Looks pretty good. Had a mopar collector at the house last night to look at my '70 barracuda....
Hey, I've never seen a pic here, but I miss your Barracuda already. I hope the price is right, with enough on the side to find your next project car? Maybe...
... Probably ought to snap a few, although its not in a real photogenic state. Its a "project" car. Its in need of a resto. Its all there essentially, but its...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
