hey i got a 1992 dodge grand caravan with the 3.3l v6. Does any body know of any companies or shops that make headers for that car? any other performance...
... body ... nope, but soon when i start my own company, i'll be making a line of exhausts, intakes, intake spacers, & quite possibly headers noone makes an...
Tranny ran real good...but I was gutting it to see if any parts or gears could be used in an A413 tranny...I have not found any yet that are compatible, but...
... Seems like you know your stuff on these trannys. I have a 95 A604. What would cause a vibration between 2nd and 3rd? I have what seems to be a lot of play...
1. The way I check the axle shafts on FWD vehicles: A. Jack up the front end, support the weight of the vehicle with jack-stands. The jack-stands must be place...
Question at first I was thinking it was a differential bearing but maybe the it's the outer bearing. The side this is on is the driver's side. I took off the...
The steel bearing support is on the drivers side and the the elongated aluminum bearing support is on the dirvers side. The bearings on the differential should...
Like I said if it was too much work to replace with it in the car I would not do it, I thought maybe if I took the cover off on the driver;s side after pulling...
Ive replaced the bearings in these witout pulling the trans many times. you have to have the right puller the passenger side is the fun one, reason being the...
This is on a 95 Avenger I'm not sure if the trans is on the same side but mine's on the driver's side. I would only attempt to pull that side bearing, cause...
Greetings everyone, If anybody has any calibration suggestions for a 95 3.8L that would be most appreciated. The engine is assembled and ready to be installed....
A couple of months ago I asked a question of why my 93 5th Ave did not coast when going down hill or such. It was suggested that I needed to replace pads,...
I know on my 90 Imperial when I let off the throttle, the lockup torque converter disengages so the car will coast farther. Is it possible your converter is...
I do not know? When I come to the stop sign I have no trouble. The tranny is not locked. On my 85 Chevy the wires are disconnected on the lock up because when...
Trying to replace the rpads on the dynasty. Apparently the style has changed some. The old ones have this metal brace that locks the pas to the caliber. The...
Hi all, I am looking at the possibility of swapping a set of leather seats from a 93 5th Avenue with power to 90 5th Avenue that has only a power driver seat. ...
Is there any difference between the 3.3 and the 3.8 intake plenums for the mid 90s versions? I've got a 3.8 Grand Voyager, I'm looking to port the manifold,...
... For any given year the 3.3 and 3.8 are identical except for the crank, rods and pistons. Its the same block, just one is bored, same injectors, same cyl...
When I was in school back in the 60's and 70's diluted meant that the original content of what ever had something else added to it. Such as a drink called the...
You are quite right. English is a funny language. We park in driveways, drive on parkways. In a few more years, you will be hard pressed to find English...
I'd figured they'd be the same, just wanted to be sure. I knew most of the parts were the same, didn't realize the injectors were the same though. I've been...
i've played with cam specs from a '94 & i think either late 3rd gen, or early 4th gen vans on Desktop dyno, now its not perfect, but its a great way to compare...
Odd that the 94 would make less power since the documentation says that cam gave a 2% increase in acceleration for the 3.3s. ... or early 4th gen vans on...
Check the photos section, uploaded a set of 2006 3.3 part pics. Rockers are most interesting, wonder if they're the same ratio as the early ones. Anyway been...
Been here, and in the process. I am working with a 1990 3.3L block, using a 3.8 Liter crank, with journals turned down to accept Chevy H-beam from Eagle...
James, I am no head-building expert by any means, but I have installed guides in aluminum heads by heating the head and freezing the guides. Did you try that?...
Greg, Did you have any problems with the valve seats falling out when you drove the guides in? That's what happened to me. i then had to make custom seats...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
