What would be involved in replacing the 4 speed auto trans in a '91 Caravan, with an auto trans from a '94? Both vans are 3.3L, FWD. My research indicates...
The TCU units for the 604 appear to come in two formats = with fins and without - I understand the finned ones are flash programmable - is this true? Regards ...
"John D." <foot_15143@...> wrote: Hello all I just loaded a picture of my dynasty 3.3 Liter with 175,000 mile on her and still runs strong. Foot_15143...
there are a few subtle differences first, the 94 is a much better unit. the 91 was an early year 604, and it was prone to snapring breakage. the 94 is series...
Yes. But all models are not just directly swappable....year/model is dependant. There are generally a couple models that will fit per year. Parts counter can...
The TCU also needs to follow the tranny. Particularly for dependancy on which speed sensor setup it is using. The 91s all used pinion-based speed sensor in...
the 94 wont have a speed sensor in the pas side axle stub. just use the one off the 91 keep the tcm with the original vehicle, trust me Darkpaw Timberwuf...
the 94 wont have a speed sensor in the pas side axle stub. just use the one off the 91 keep the tcm with the original vehicle, trust me Darkpaw Timberwuf...
Thanks for the advise, but I am unsure of what a code 33 seperator plate is. Is it internal or outside the case? Do the input and output sensors need to be...
Neal, another question about lock-up. I have a '94 PGV, 3.3l, A604. The lock-up comes in as low as 30 mph (in temps over 70 deg. F) and low 40's w/temps under...
Hi, We updated the free classifieds with several car sections. http://classifieds.powerpassion.nl/ So if you want to sell or buy cars and parts, you are ...
find out for me if it happens in 3rd gear also. if so, feel the upper radiator hose. if its warm, but not hot, suspect engine temp sensor, or a thermostat that...
Hi, I have several Chrysler cassette radios which will fit in a majority of Chrysler products from the mid 80's to the early 2000's faceplate changes, as well...
"Thomas M." <turbos_rock@...> wrote: Hi, I have several Chrysler cassette radios which will fit in a majority of Chrysler products from the mid 80's to...
Hello all, I am servicing the serpentine belt for my first time on a '91 3.3L Dynasty (125,000mi). The Mfg Date is 11-90 which means I had to purchase a...
hey guys, Our '94 GC is having some trans problems, it only has second gear, this is a rebuilt by mopar A415? i can't rememeber, but my dad was driving it, &...
Hi all I'm trying to gain some "faith" in our Chrysler 3.3 and 3.8 V6 motors. I am wondering if there's anybody in the Minnesota or surrounding area that might...
Tom, while I'm not anywhere near Minnesota (living in Washington), I thought you'd like to know that while I love my daily driver (a 90' Imperial with all the...
In reply, I have a 1990 Chrysler Imperial and it appears to be a fantastic car. I bought it when my other car gave up. Apparently it had not had much work...
I thought they started using the 58mm on the 3.8 in the later-model vans (2000+ MY?)... Cheers. -DP ... From: John [mailto:wonecold1@...] Sent: Friday,...
Hi -- I desperately need a working A604 trans to fit a '90 LeBaron convertible. I can drive to pick it up if within a reasonable distance from San Francisco....
I own a 1991 Dodge Grand Caravan 3.3 V6 If I don't fill the gas tank my gas needle doesn't register. When it gets to about 3/4 it stops working. The tach works...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
