As I remember, Tony Hallo was the first person to make a schematic drawing of the adapters and that's what Bob used to make his sleeves (I think). Let's give...
Bacchus_101573_REMOVE...
Bacchus_101573_REMOVE...
Sep 4, 2001 12:52 pm
35134
Bill, Are you still planning to bring that car into CA? If it were originally registered in CA you might want to wait until you move here before registering it...
sunbirduser_REMOVE_71...
Sep 4, 2001 12:52 pm
35135
this might seem like a strange idea, but did the parts store give you a 4x4 brake hose? same hose only a lot longer [This is message #23590 by user octowman...
octowman_REMOVE_50249...
Sep 4, 2001 12:52 pm
35136
ok GM gurus help me out here. the engine I took from my starfire(hbody content) to put in my jeep is a 350 chevy. I am putting it in my jeep and behind it a ...
hondaRRman_REMOVE_664...
Sep 4, 2001 12:52 pm
35137
I wish I could do that.The problem is I need to get this car up and running soon as my dually is killing me on gas.I have heard about the whole Ca DMV ...
billy_b_85222_REMOVE_...
billy_b_85222_REMOVE_...
Sep 4, 2001 12:52 pm
35138
I remember a lot of those fun times. ( I know many of us were involved and I apologize for any omissions ). I had just joined this group and was amazed to find...
ks_skyhawk_REMOVE_206...
Sep 4, 2001 12:52 pm
35139
Thank you for your offer.I know you have offerd before too. I''ll have to start researching the correct part numbers.Once we get past selling this house thinks...
billy_b_85222_REMOVE_...
billy_b_85222_REMOVE_...
Sep 4, 2001 12:52 pm
35140
My S-10 Disc Brake Conversion has the stock Nova Style Brake Hoses. They exit the caliper and run forward, making a lazy loop under the upper ball joint stud...
twelve_second_vega_RE...
twelve_second_vega_RE...
Sep 4, 2001 12:52 pm
35141
Allthough this may have already been stated before, I have used a real neat trick to ensure that I pass the sniffer. Run your tank to near dry. Go buy 1 gallon...
fastboatman_REMOVE_97...
Sep 4, 2001 12:52 pm
35142
Thanks for all the good ideas. [This is message #23596 by user tjvanoverbeke on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]...
tjvanoverbeke_REMOVE_...
tjvanoverbeke_REMOVE_...
Sep 4, 2001 12:52 pm
35143
I'm seriously considering making tubular upper a-arms with adjustable ends on the inside mounts. I think a 4-link or ladder bar end-link with poly bushings...
stinkybuttihave_REMOV...
stinkybuttihave_REMOV...
Sep 4, 2001 12:52 pm
35144
Just an idea, why not get a dual pattern flywheel? Denis's idea may be cheaper though that way you wont have to get a new starter nose. And this may be a dumb...
lenny1_70_REMOVE_2471...
Sep 4, 2001 12:53 pm
35145
Bill, My California Emission Technician Certificate (Smog License) just expired 3 months ago. I did this for a living off and on for the past several years. It...
twelve_second_vega_RE...
twelve_second_vega_RE...
Sep 4, 2001 12:53 pm
35146
Donny, you`ve got the wrong flywheel for the converter... or you have the wrong converter for your flywheel... usually small (153) flywheel will only have the ...
denisst78_REMOVE_7621...
Sep 4, 2001 12:53 pm
35147
Aleck, This is what I mentioned on the earlier post. The two that caught my eye had threaded bungs already in place and one ea. for a metric or standard bolt ...
ks_skyhawk_REMOVE_704...
Sep 4, 2001 12:53 pm
35148
The hoses do have a rubber sleeve on them but I am worried about it rubbing the rim and tire and at that rate it would eventually wear through the sleeve and I...
lenny1_70_REMOVE_7094...
Sep 4, 2001 12:53 pm
35149
Aleck, I have been trying to contact you about the V8 bellhousing you have. Please e-mail me with your asking price. My e-mail address is "dacse@...". ...
dacse2000_REMOVE_7734...
Sep 4, 2001 12:53 pm
35150
were the 80 Monzas equipped with small blocks?Some place i thought i read that only 4& 6 cyl engines were available.I keep my cars running in top shape,its ...
billy_b_85222_REMOVE_...
billy_b_85222_REMOVE_...
Sep 4, 2001 12:53 pm
35151
According to the instructions I got with the adapters it says to use Brakeware P/N 88624 which is what I have from Autozone. Everything does fit just like the...
lenny1_70_REMOVE_8421...
Sep 4, 2001 12:53 pm
35152
Hello, just started looking today, still have body? how complete is it, Hatchback? thanks Rob [This is message #23612 by user suptmason on Yahoo! Club GM...
suptmason_REMOVE_8818...
Sep 4, 2001 12:53 pm
35153
Bill For the Monza's 1980 model year, Chevy decided to drop the V8 option altogether and only offered the Pontiac 2.5L L4 and the Buick 3.8L V6, so I don't ...
fyrftr50_REMOVE_30877...
Sep 4, 2001 12:53 pm
35154
Thank you everyone who has had input on the brake hose question, I appreciate it lots! I'll try my idea in a previous post and let everyone know if it works ...
lenny1_70_REMOVE_2271...
Sep 4, 2001 12:53 pm
35155
found a complete 74 vega wagon at everett pull a part Marvin [This is message #23614 by user Yosarrin on Yahoo! Club GM HBODY:...
Yosarrin_REMOVE_27157...
Sep 4, 2001 12:53 pm
35156
I thought so too but there was no markings for L and R. Thanks for the thought. [This is message #23606 by user lenny1_70 on Yahoo! Club GM HBODY:...
lenny1_70_REMOVE_2074...
Sep 4, 2001 12:53 pm
35157
I've done it twice, once 20 years ago with Cadillac Eldorado brakes. I adapted the caddy bracket to the axle, and made a spacer to fit re-drilled Vega axles....
gderian_REMOVE_326268...
Sep 4, 2001 12:53 pm
35158
Yes, hatchback. Still have it for now. Email me at gderian@... for details. [This is message #23617 by user gderian on Yahoo! Club GM HBODY:...
gderian_REMOVE_970285...
Sep 4, 2001 12:53 pm
35159
I hope not, but I did specify a 2 wheel drive S-10 and the part # matches what to use. [This is message #23609 by user lenny1_70 on Yahoo! Club GM HBODY:...
lenny1_70_REMOVE_6781...
Sep 4, 2001 12:53 pm
35160
There are 2 different bolt patterns on some chevy flexplates a smmaler and a bigger set. This would include 6 holes in the flexplate totally. I suggest you...
nickster1_99_REMOVE_7...
nickster1_99_REMOVE_7...
Sep 4, 2001 12:53 pm
35161
Hey, Dolores (Bob Gumm's wife here)....hope you guys don't mind if I interject. I was just checking our e-mail and saw these posts. According to Bob's ...
Venom_Symbiot_REMOVE_...
Venom_Symbiot_REMOVE_...
Sep 4, 2001 12:53 pm
35162
I wouldn't try to bend anything, that would certainly be a last resort. I still think if you try to re-index the hose in the frame mount that it may put the ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
