I recently ordered a 12x18 factory photo of a special delivery from Sacramento Vintage. I have always been told that the Special Delivery was only produced in...
Fred, I assume that you are asking if I can post a copy of the photo I have? All I have is a 12x18 photo that I purchased, I don't have an actual delivery that...
Posted by Steve Plucker/Walla Walla, Washington from 66-52-142-5.oak.mdsg-pacwest.com (66.52.142.5) on Wednesday, March 18, 2009 at 1:15AM : A friend of mine...
Two Questions: First, You can lock the drivers door by placing the inside door handle in the lock detente. But can you lock the passengers side door the same...
By using a locking out side door handle, you should be able to lock the passenger side door; some people add a locking outside handle to the driver's side for...
This struck me as rather sad. If you look at the way the back of the cab was constructed, and the shape of the headers above the doors, it appears that this...
this looks to be a stock cab that the rebuilder did not have a back panel, so he just guessed at how the window area would look. I have a 24 GB that is very...
1. Window Regulator and Channel. The 30 / 31 pickup, 3 hole regulators seem to fit ok but the channel used on the 30/31 Pickup do not work. Does anyone know...
Just where can I locate the 100% correct pinstripe detail for a 79A Body style Delivery. I am just not really comfortable yet to have at it with a brush only...
look at the Model A Ford Paint and Finish Guide 2nd edition revised , MAFCA , paul ... From: modeladave <modeladave@...> Subject: [modelapaneltrucks]...
Attached is a picture of an 85-A Panel Delivery showing the pin striping. The 85-A would be the same as the 79-A. Regards, Neil Wilson ... From: Paul Zerr...
I forgot the attachment. Neil ... From: Neil Wilson or Holly Moore <wilsmor@...> To: modelapaneltrucks@yahoogroups.com Date: Fri, 10 Apr 2009 08:51:11...
The stripe on a 79A is on the flat part of the sheetmetal not the reveal moldings as is comman on MOdel A'. The stripe outlines the panel. There are lots of...
I have questions on 30 / 31 Panel Delivery Windlacing that goes around the front doors that I hope someone can help me with. I have seen the windlacing...
Good morning. I am finally getting started again on the 225A (drop floor) panel delivery. I just received the rear door latches that I got from Joe Davis and...
I am gathering information and material to start buying the items to install the roof 'leather'. I have reviewed the Body parts Book and believe I understand...
... Good morning. The Body Parts Book shows that to be part number A-81264. It is 5/8" wide and approximately 5/16" tall before closing the gap. It appears to...
Hello, I have an original steel top molding for a 30-31 panel del. I don't know if it is for over the visor or over the rear doors. Did they both use a...
Anyone know anything about the 29 sedan delivery on ebay . I am looking for one and don't know if I should bid on that one or not . It is located in Florida ....
Joe It is item 280391656299 . Dan ... From: Joe Davis To: modelapaneltrucks@yahoogroups.com Sent: Wednesday, September 02, 2009 7:08 PM Subject: RE:...
Does anyone have a picture of what the tool box behind the passenger seat on a 130A looks like . Is there any sort of cover and hinges ? Also any picture of...
I have the drawings for the tool box behind the front seat, also the drawing of a metal bracket that hold the dome light switch on the right wooden door post....
I just ran across a fellow from Ontario, Canada who owns a '32 B-79 panel delvery. The truck is in the process of restoration. It sounds like his restoration...
Steve, As moderator of the group, I don't have a problem with extending the year spread. When did Ford stop using the 79-? designation? What do others think? ...
 As only one member - i have no problem with a 32 truck in the group. But if others have a problem with it - i really do not care - one way or another. I...
I've got no problem here either. What part of Ontario is this guy from? I'm just west of Toronto. ________________________________ From: steve_17551...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
