Here are some shots of the rear upper corner braces and a plate that bolts onto the rear of the header over the rear door, it has the latches in it for ...
Hello Dan, I'll try to look Tuesday. Robin ... From: "Daniel Smithwick" <daniel.smithwick@...> To: modelapaneltrucks@yahoogroups.com Sent: Thursday,...
Hello Dan, There are two parts-the inner and the outer pieces. I only have the inner piece, solid original. If you are interested, I'll send photos. Robin ... ...
I can make the missing piece, once you are sure what you have and what you need. Let me know. Joe Davis Aries Limited 22400 Skyline Blvd. La Honda, CA 94020 ...
I need the trim strips that fit between the side panel pieces and the rear metal corner post panel (rear door post panel). If any one has any or know of...
Contact Restoration Supply Co, Escondido, CA 800-306-7008 They have a great catalog of all sorts of hard to find items. Page 21 shows A half Oval brass strip....
Sent: Tuesday, October 21, 2008 8:46 AM Subject: [maxwellbriscoeowners] GROUPY DO NOT REGISTER!! I got an email from model T Michael asking me to join his...
I used a set of closed cab pickup "T" strips part #A875T in Mike's catalouge. These are used on the 28-29 between the cab corners and the back. I cut off...
Some one needed the rear storage tray, that goes behind the drivers area on the side. I can make both the inner and outer piece for about $350. They would be...
Joe, Is this storage tray only for the deluxe or is it the same as the panel delivery? My panel delivery only has a one piece unit. You have me wondering if...
This tray was used on 1928-29 and 30-31, there is a right side version and a left version. They all had liners. This was used on all 79A and 79B, drop floor...
I confess I don't know much about Panel Deliveries, however I have done ground up restoration on other Fords such as a Deluxe Delivery: which had a Package...
There was a tool storage bin under the front seats, I have seen these on 28-29 and 30-31 although each is slightly different. The bin I am referring two mounts...
Phil: Check out my "Tim's 79B" folder in the Photos section, particularly the shots Steve Freeman took of the inside (2nd page). The wood in my panel was...
Joe I am in need of a tool bin for my 79A . Could you post pictures of what you can make and what is correct for 79A . I had gotten the blueprint from The ...
Does the drop floor 225A and the panel 79B use the same sheet metal except for an additional piece at the bottom of the rear doors? Does anyone have a...
On the 79B panel cab doors, what type of screws are used for the window molding? These have 4 at the bottom which screw into the door. The 3 across the top...
One side uses a regular oval head 8-32 screw and the other a "Tube Nut". These were also used on the slant window molding. Mac has them, P/N NT328, screws...
I have a right hand rear door for 79A panel delivery . Needs new wood but is not rusted out . Has interior window molding . No latching hardware . $300.00 plus...
I notice they sell these retainer pieces for the 79A Models but I can't find any for the 79B Deliveries. Does anyone know ho sells them for the 79B's or can...
I don't know of any available or if they are the same for both 79 A &B. For my 79B, I bought some 3/4 " angle iron, cut them to lenght at 45 degree angle,...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
