Hmm ... well, it sounds straight forward enough, just have to get the engine here and start mucking around. What I'm wondering though, how do you control...
Advance is done through the MS&S, the dist needs to be rotated so the slots are set at max advance then the MS&S retards it from there. So there really is no...
Mike, you are definitely a clear ray of light through all of this! It makes perfect sense once you say it, even though I've read something to the effect ...
That makes me feel good as everyone has been telling me for the past week that I am becoming less and less coherent. Maybe some sleep will help. Thank you, ...
Hi Mike Just my Tuppence worth, regarding the 180 slots,is there a means in the megasquirt to divide the signal by two,or even build a divide by x using a Cmos...
In MSnS Extra you will have a spark advance map, just like you have the VE table for fuel. Its all pretty straight forward to sort out. ... the engine here and...
Grahame, Could the CMOS 4017 actually cut the 180 pulse to x pulse per turn? The problem is the MS can not input 1,440,000 pulses per second (8000 crank rpm ...
I didn't say revs per second, I said revs per min, I messed up and put in 1440000 pulse per sec as that is pulses per min. You are correct that the end result...
I know what you meant. A 4017 divide ten would give 2400 presumably fine for MS input? ======================================== Message Received: Nov 02 2005,...
Heh ... well, I WASN'T lost. What I'm also curious about ... there is a guy (in fact more than one) on Hybridz that is running a 280ZX (83, with CAS) on an MS...
... divide by three (8000 pulses per second or 8khz) ... (I believe)then the signal will not need to be further refined or conditioned,and the output will be...
If the 4017 can bring the pulse count down that far then we could possibly use the Nissan trigger wheel. But for the wasted spark it would need another input...
OK, he is using the cylinder identification ring (6 slots for his application) this would only be good if you have a dist. Thank you, Mike Lough LoCustom.com ...
Might sound daft, but cant you just trim half the prongs, teeth or whatever they are off the sensor wheelr??? Not a big job and the only problem I can see is...
That might be an option for denoting the reset, I believe that if 6 of the slots were made solid or removed at both TDC positions (well 30° BTDC) that it...
I would like to know the whole BOM for the construction of a MS & Spark V3 Board intended for turbo use. I will start from cero. So I will need all the...
Just thought I`d say hello, Joined up to lurk for a bit, as I have a number of projects on the go, a couple of which are going to be injected. I am just trying...
Welcome, Dom! There have been few 5-cyl Audis MS'd, mainly in the states, so there should be plenty of knowledge around there. Ford applications seem quite...
Hi! Just wanted to say hello since i just joined this group. Information about me: I have built a seven-clone powered by aFiat 1756 TC with turbo and ...
I found a neat new ignitor here http://www.smartplugs.com/index.html The company claims their "smartplugs" can convert a gasoline engine to run on various...
after finding this http://www.smartplugs.com/index.html The maker claimes their smartplug can allow a gasoline engine to run on diesel and other fuels. So my...
Snake Oil more or less fits the description of these things. The concept does work, but not well. The engine's timing is dependent on induced detonation...
I have a one litre 3 cyl sprint engine circa 1990 which was throttle body injected and ecm controlled. hence it has only a magnetic trigger in distributor. I...
It appears to be down for time being. I have seen it go down number of times before. ... Regards, Boris Mohar Got Knock? - see: Viatrack Printed Circuit...
Don The hei , 4 pin, schematic is on the yahoo groups vw or half vw list in the files section as I recall..Herb One of the modules that I have has an output...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
