I'm looking to install a MSS on a 1g DSM using the ford EDIS system. I've been researching, and I can't find any specific answer on where I can put the crank...
There are companies that make a sensor wheel that attaches to the cam sprocket. It has 2 holes 180deg apart. It has the same effect as the crank sensor, only...
I'm currently using an MSnEDIS for spark only. Megatune displays the correct pressure and rpm, but there is no spark advance. It just stays at the base...
I had the same problem when I originally modified my board for EDIS instead of Fidle. My problem was due to a bad solder on the board change. I was able to...
Hy, I just started configuring my MSnS with help of a MegaStim. When it runs with default setting everything is fine. The MSnS communicates with MegaTune and...
... communicate. ... Yes. Standard Megasquirtnspark did not support 1cyl or 2cyl. Magnus released a special version, but try the Megasquirtnspark-extra code ...
Hi all. I'm running a 2.0 pinto spark only with twin dellortos at the moment, and I get a lot of popping back on overun. It runs fine and pulls very well...
I think that module is interchangable with the 137/139 modules. Look here http://www.msefi.com/viewtopic.php?t=4745&highlight=bosch If you cant get it to work,...
FYI, the 124 module doesnt control dwell, while it will work I would recomend that you procure a 139 module from a saab (or use the extra code that has a hack...
Try adding fuel down there. If you are running msns-extra you can turn off the fuel on overrun on version 021o Don't do this on a oil mix rotary. AW ... ...
Hello Popping on the overrun can also be caused by a mechanical leak into the exhaust system. If you are getting popping on all cylinders then it may be...
popping in the exhaust, on carburettor engines can be a sign on, rich
mixture on decelleration / M ... Från: Darrell Dixon Datum: 01/04/05 16:24:28 Till:...
Just to congrat you and the MS gangs on the MS. On page 46 of current issure of Grassroot Motorsport(Feb 2005). Megasquirt is the second things of top 20...
Hi all, I have a 1989 RZ350 twin cyl two-stroke motorcycle. It has a VR sensor that is trigger twice every rotation of the flywheel by two tabs that wip past...
Hello All, While building my MS I had downloaded MT version 2.20 to familiarise myself with general workings and all was well. I've now downloaded MT 2.25beta...
I looked around for an answer, but did not find one. There is tons of information (that I found) on MegaSquirt, but not so much on the spark! Anyway, My...
Go here www.msefi.com and look under fuel and spark about halfway down the main page. Under MSnSExtra I believe people had discussed coil on plug systems....
I searched the archives but came up empty. Has anyone successfully controlled spark on an LT1 or LT4 with MSnS Extra? I've got wiring diagrams I can post or...
Nooby here, I have an 89 Ford taurus SHO 3.0L v6 i will be swapping into my 64 volvo 122s. The motor has the EEC-IV computer and the DIS (not EDIS) ignition...
Hello Iam new to this fourm. I am planning to try a complete setup of mega spark and mega spark 2 on my 94 Geo Tracker 1.6 engine. My question is do i remove...
i have done some work with the edis system and from what you have said its similar i have the 36.1 tooth decoder software in the alpha stage but never followed...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
