use the choke and try again, then verify if the sparks get wet. byeee Horacio Buenos Aires ARGENTINA Lic. Horacio R. Colombo Gerente de Sistemas Grupo SIDUS ...
... I'm guessing there is another Vance out there with an 81? Hopefully, know one thinks I'm trying to ebay my KZ1300. I'm just getting started on the thing.:)...
Hi, In regards to cold starting I fixed a vacuum leak on my bike and cold starting improved 100%. The hoses that come off the valve cover look prone to...
Me bad. It was Wisconsin Wayne's bike. gggGary ... I'm guessing there is another Vance out there with an 81? Hopefully, know one thinks I'm trying to ebay my...
Greetings, I joined a few weeks ago and after watching the threads, seeing that this is a good place to be, I wanted to introduce myself I'm Bill, located in...
There have been aftermarket rear master rebuild kits on eBay this year, keep watching or set a search. I have rebuilt some pretty sad rear masters with good...
Yes it was my bike. IT was very unfirtunate that things came up forcing me to sell --- it is unlikely I will ever find one as nice. IT went to Michigan where...
Hi all... I am new to this group. My ride is a 1980 A1 with 32000 miles, dressed. My question, Just changed oil yesterday. I have the same noise some others...
Please give us some specific information about the oil and oil filter: 1. What brand/weight/type was the previous oil. 2. Did you also change the filter? If...
Hi... 1. The cct just got a new APE manual cct last week. 2. The oil used is Supertek from Walmart. The previous oil was 15w40 with about 1200 miles on it....
I was supprised when I checked, and the 20W50 is in spec for oil for this engine. Usually a liquid cooled engine doesn't need or recomend such heavy oil....
The other more serious thought that comes to mind is a failing main or rod bearing. Horrible to think of but worth consideration due to the disasterous...
I am not sure--- I will contact the guy that bought it. The other thin with it is that the rear attach point needed to be cut off and moved forward an inch....
Hey Guys, My clutch is a little stiff. Is this a characteristic of the bike or do I need to dig a little deeper? I just broke a clutch cable recently and...
I have done a couple master cylinders this year where i could not get the smaller port cleaned. I put it in my Harbor freight ultra sonic cleaner with a little...
Hi there, I did, I got a "T" adapter from a local pipe supplier and put it in line with the oil pressure switch. Works a treat. You can see straight away ...
Start digging, the clutch should be smooth and pull is reasonable for the horsepower. Just about everything except the clutch plates are under the three screw...
Gary did a pretty good job. Did you do a valve adjustment? Probably a loose valve. Go back and change the oil filter. The filter on the bike is nearly clogged....
I salute you for having upgraded the CCT with an APE unit. You have eliminated the number one cause of "grenaded" KZ1300 engines. Also, you did well to...
Hi Horacio! Mi espanol es muy mal. Being from East Texas my English is not so good either. I need to come to down to Argentina so you guys can straighten me...
Ok... I got an oil pressure gauge, hooked it up and it shows 22psi at 1000 =/- idle rpm running for about 5 minutes. At 2000 rpm it goes to 40+ and tops out at...
that sounds pretty good, bible sez 28 psi @ 4000 rpm engine warm. Overpressure relief kicks in a 63 to 85 psi. ps the bible sez Oil pressure light comes on ...
Here's the scoup after several FUN miles... The oil pressure stayed high for at least 10 miles running some mild twisties close to home 40 - 50 mph - (state...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
