I got an RX7 intercooler from a list member. Since it's going on a bike, I had to cut it up into pieces. Naturally I had to take pictures. Since most people...
I lost my yahoo password many moons ago. Pleas lemme know when you have it on your site. Cheers, mv ... From: Fred Scott To: jyturbo@yahoogroups.com Sent:...
Thanks, I have 4 more, and found a cheaper shipping avenue through work if you should break it. mv ... From: Fred Scott To: jyturbo@yahoogroups.com Sent:...
Been living with this tapping sound in my engine for a while. It has recently got a little worse so I want to fix it. I listened to the engine through a piece...
Well - I took the rockers off and found some problems but nothing like what I would expect to cause this strong of a tapping sound. The #1 exhaust valve stem...
Well - I've been in tubeline hell today! Just got about 90% done with the oil and water lines for my latest turbo project. Still have to drill and tap the...
nice pics, David. I'm using a water-cooled turbo as well but people tell me that water cooling is almost not worth the weight and trouble. Does anyone have...
... That's nice looking. Frankly, I was more concerned about the long run at a low angle than I was about the material. Do you think you'll have any drainage...
Thanks! I think that tube may be pre-annealed. It is called "soft copper" tube and is really malleable. My other car also has a Turbonetics ball bearing...
Looks good Cat man! What program are you using to be able to draw the arrows and put the text in on the pictures? ... From: "David Allen" <davida1@...> ...
Well that does appear to have more wear on it than normal- I need to post a video/sound of my 3.1, it's been making a noise that sounds like a rod knock since...
At first I was thinking piston skirt also, but this sound is definately coming from the top of the engine. Unlike a piston skirt, this is not affected by...
David, the wear on the rocker shows that it's not sitting squarely on the valve stem. Maybe that part is caused by a loose valve guide. I had a noise in my...
I personally have had several wheezers drop skirts... doesn't seem what sort of factory piston they all did it after a good prolonged rev . A very good reason...
If you have ever sawn a water cooled Garret center housing in half you'd have little doubt that it couldn't possibly do all that much. It probably helps,...
I went from a non-water-cooled Rajay, to a Turbonetics water cooled ball bearing turbo. The Rajay would get so hot that you could melt solder on the compressor...
I did a search on this group to see if anyone has brought this up but didn't turn up anything. I've wondered how much these inserts reduce the compression...
They get SO HOT becasue they are basically an external chamber without any cooling water around it. Would the hot spots they create possibly cause more...
zinc dialkyldithiophosphate or ZDDT has been removed for some engine oils so I heard. This is bad news if you do not have a roller camshaft I hear. Anyone...
Wonder what effect to a non-camshaft engine? (RX-7`s) ... From: Jimmie A. To: jyturbo@yahoogroups.com Sent: Wednesday, October 08, 2008 8:14 PM Subject:...
I just received this. Is this spam?? Forgive my dumbness but I had to ask. Thanks Randy Hicks 86 GLH S60 86 GLHS 373 89 Turbo Mini 85 Shelby Charger 89 Shelby...
I don't know what it's about either, but I got the same email Kevin ... From: GLHS60 To: jyturbo@yahoogroups.com Sent: Wednesday, October 08, 2008 10:38 PM ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
