On my Buick Turbo draw-through TBI engine, I have opportunity to use a HEI distributor with an MSD6 ignition box; OR a factory GM DIS system. It will be turbo...
Dave, When it comes to street applications I will take burn time over strike times any day. The world has been brain washed into thinking that anything made...
Tom, thanks for the input! I may not be able to use the DIS system afterall because the engine block I was planning to use (with DIS compatible front cover)...
Dave, Like I said, I could spend some time on this subject. But in a nut shell. 1) The small cap HEI is not of the same caliper as the REAL large cap HEI that...
Tom, thanks for the interesting info. My newest project car has a genuine big-cap HEI. Will try it without MSD and see if there are any issues before ...
Very good info. I will say that with the right setup you can get good results from a small cap distributor. I run a Mallory small cap with hall pickup....
Last night I had a dream where I was in a large rural acreage with mixed woods, pastures, and old junk farm equipment and cars. There were old turbochargers...
Wait`ll you take a dump and find a LH nut!!! ... From: robert stuart To: jyturbo@yahoogroups.com Sent: Saturday, July 12, 2008 11:02 AM Subject: Re: [jyturbo]...
Well, I guess *I* didn't really sort it out, but another fellow, whose thread I was following, did.. If anyone remembers, I was having issues on the dyno last...
Lol! Figured y'all would like that one. At least I didn't describe the dream I had last year where I was miniaturized, inside my stomach surrounded by...
Wow....that kindof sucks. I really thought the MS was more well tested than that. It is good you found it, but wow that is a big problem. EGT must have been...
My 1995 Mustang with a 408 is about to be fitted with a pair of VATN Powerstroke turbos. These are the kind with a variable pitch controlled by oil pressure...
I still have plans to put 2 T3's on my 351W in the 66 Ranchero if I can still afford a little gas. One other idea was that since I have to put sub-frame...
It has been done this way many times. One of the magazines just had it featured a couple of months ago. Guy put a 460 in the car and had twin turbos in the...
There are setups like this that do work, however I have some doubts that the results would be as good as a conventional turbo. Back in the Good Old Days,...
Matthew, I won't claim to be any kind of turbo expert, but I'm aware of three remote mounted installs. One is a full time daily driver, the second was a daily...
Matt, Of course it can be done. I was thinking of putting two turbos in the back where the mufflers go and sacrificing the back seat if necesary. With 12-15...
Congrats, Andrew! Time to take it down the 1/4 mile again! ... From: jyturbo@yahoogroups.com [mailto:jyturbo@yahoogroups.com] On Behalf Of Andrew MacPherson ...
... it featured a couple of months ago. Guy put a 460 in the car and had twin turbos in the trunk but the car was not street driven. ... Aaron, I believe you...
Heh. I can't even remember my dreams, but since I took this new job (well, not new anymore, had my one year anniversary a couple of months ago) my wife has...
I pay good money to keep from remembering dreams. `Course the buzz is OK, too.... ... From: Mark Pikas To: jyturbo@yahoogroups.com Sent: Monday, July 21, 2008...
I'm giving it a seriously hard look for engine management... I've gotten a bit fed up with messing with GM ECMs and how if anyone figures anything out with...
Anyone come up with a good way of doing it for larger turbos? I've done all sorts of levering, jacking with bolts, hammer and brass drift... on smaller ...
... MSExtra has all of that, if I recall correctly. Electronic trans control is coming as well, starting with the 4Lxxe family. May already be there. They...
Hi Mark, Have you hit a tuning hurdle that you can't get past with the GM ECM? Maybe ping me offlist if I can help and you haven't shlt canned it yet. I've...
Well I can tell you I've been through a lot with the megasquirt, and it's a great unit. I was able to put down 500whp last year with it, while having...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
