Well I should have the motor out of the pickup today and may haul the Dodge to the wreckers to make room around the yard before the snow comes. I bought a 1988...
Now a man that buys his own moving truck, there's a do it yourselfer! ... From: "Jimmie A." <stillrn@...> Well I should have the motor out of the pickup...
you can also find all those dt466 parts a your local ag machinery dealer...look for case-ih dealers, or junk combine salvage yards as well.. good luck..they...
A friend of mine is exploring this option.. He has a monster turbo on his rotary, so he needs something that will spool at 2500rpm, and be free flowing at...
I want to build a TT setup like Mike Sitars. Basical, i know nothing about turbos. What are some spec's that i should be looking for when shopping for turbos...
Hey, hope your project gets off to a good start! I won't give much advice on sizing a turbo because on my first system I used what I already had; and on my...
I plan on starting off with a set of mildly worked over E7 heads on a "stockish" 5.0 lower end. I got the heads for almost nothing and they are like new. My...
I wonder how the rest orf the RPM range is, though. Is he still moving enough volume at high RPM? Or is he going to have to use a wastegate or something to...
Your fuel system cannot be basic if you want to make this work as smoothly as possible. You will need a good high pressure pump for the blow through, a quality...
... Why? I thought the 'binder 466 was immortal. What went wrong? bk...
Brian Knowles
briankk@...
Nov 1, 2007 3:01 pm
88509
Those datalogs were of my explorer.. It has a 5000rpm redline.. Looking back, I didn't make it that clear.. :) Cheers, ... Andrew MacPherson www.ttz28.com ...
Nathan is on the right track with the fuel system. There are people who claim huge power increase with a stock fuel system; and I read with skepticism. Don't...
Holy crap, when it comes to answering my questions you guys don't screw around! I'm just starting to dig into this project so i have a ton of questions but you...
... In my experience, it is immortal, the only thing that can screw that logic up is idiot operators. I maintain two at work, one is a 28' box van, 250K...
I would bet you will need an SAE adapter for the cummins. I hauled one to the scrap yard a few weeks ago, or I might have one that would have worked. I do...
Well I worked from 9:00 this morning till 6:00 tonight and have the motor ready to pull. There are just the motor mount bolts to remove and all are loose, the...
That modification makes a hell of a difference. Looks like the turbo is perfect for the truck now. When do you blow up the engine or trans? JimmieA. ... ...
Dan, I didn't read a mention of when the problem is most prevalent (idle, cruise, load, hot, cold.) I have an Exploder with a partly-clogged injector which...
Tom, I appreciate the feedback. I had the dealer set it in their yard until we execute the will next week. At that point if my wife and her siblings want to...
Addiction is right.... First was my turbo S-10, then a turbo pulling tractor, now onto turbo diesels(really thinking hard about my first compound build). My...
Yea, it was defenatly worth the 20 minutes of my time.. :) I really hope that I don't have to pull the engine and trans at all.. The trans are known to be...
I was also thinking of this the other day... I have to wonder what the difference in mileage will be.. My fuel mileage was the same before/after the swap...
I decided to test out my Chev pickup hauling a big load. I plan to haul a few loads across Canada in the next year or so so I wanted to know what to expect...
Jimmie, does your DT466 have the turbo ? All my farm tractors, except the littlest version using that same block were turbo'd...the hot rod tractor guys or...
Yeah, a DT466 with the P-pump can be very impressive. I know one puller making around 7-800HP with his using a single GT42 Garrett. ... From: Jim Dos To:...
The DT466 is turboed, I didn't notice an intercooler but it must have one. I hope to get the truck home within a week or so than get the motor off the the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
