Powerstroke intercooler http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AMESE%3AIT&viewitem=&item=120167915690&rd=1 GN turbos...
Thanks Jimmie, I don't have any way to easily check the pressure before the turbo, at least not this year.. :( ... Andrew MacPherson www.ttz28.com ... From:...
That's pretty crazy! It looks fake (not saying it is). I'm suprised there's actually a fire in the cylinder, and suprised that it seems to burn around the...
I suspect it is real. I do think they have edited to take out some parts of the cycle where not much is happening. I’m curious at how much of a load is on...
Ok, I hate to do this since I haven't been around much and when I was around I don't think I ever contributed anything of turbo relivance, but I still believe...
CV joints! They develop dimple wear patterns that make them try to straighten out when torque is aplied, and as the rollers ride over the dimples, you get the...
Tri-pot joints? ... ____________________________________________________________________________________ Be a better Heartthrob. Get better relationship...
LOL.. I'm with David though, sounds like and axle problem.. Just be aware that remanufactured axles aren't always ok.. We put 2 new reman units in from NAPA...
It is possible and no, you don't need a pro to do it. My friend did it to an intercooler when we were in college, the hardestpart is getting it not to leak....
Dave Sitar
tooslowcrapi@...
Oct 3, 2007 11:15 am
88378
I found out yesterday that I got the 1994 Dodge 3/4 ton 2 wd truck with a Cummins and auto trans. This is a complete truck with a minor front wheel damage....
As far as cutting, I imagine that a band saw w/ the apprpriate blade and speed would be the ticket to keep from melting/galling the aluminum. as far as welding...
So the cummins will bolt right to the ZF6 or 4R100? That's pretty handy. What issues will you face with the conversion (mounts, wiring and fuel system)?...
... From: Dave McFarland dave.mcfarland@... Date: Wed, 3 Oct 2007 13:17:30 -0400 To: jyturbo@yahoogroups.com Subject: Re: [jyturbo] Starting a Cummins...
... Was in Payson, AZ, couple of years ago, guy starts up this Suburban that sounds, well, not like any Chevy ever heard. Guy said he had a 8 liter Cummins in...
Brian Knowles
briankk@...
Oct 3, 2007 10:56 pm
88383
... From: Brian Knowles briankk@... Date: Wed, 03 Oct 2007 15:56:31 -0700 To: jyturbo@yahoogroups.com Subject: Re: [jyturbo] Starting a Cummins conversion ...
You need to buy an adapter plate for the Ford transmissions. You also need to buy a controller if you go with an auto. www.fordcummins.com sells the kits cost...
Come get er! :) Some days I feel like selling the damn thing.. No 1/4 times yet.. Did plan on making an event, but couldn't get it sorted out in time.. ...
Guys, I'm new to the group, and I am currently building a twin turbo Mopar. The car is a 1975 Plymouth Duster, I have the engine currently in the shop, it's...
Adrian, I am building a 440 TT as well. I am using Garret T4's and had a cam ground by Elgin Cams. I am now deciding on which ECM to use to control fuel, spark...
First of all that will be some Duster! As far as the cam, I would pick one that would give you .8 – 1.0 HP per cubic inch when naturally aspirated. Assuming...
As far as the cam goes, try to find one with a minimal amount of overlap as to avoid pusing the charge right back out of the chamber. ... From: Daniel Nicoson...
Dave Sitar
tooslowcrapi@...
Oct 4, 2007 6:02 pm
88391
Tom, I going to run a carb set up first, then later on go to a fuel injected version....
Good Luck. I have been driving my 6BT conversion for a little over a week now and I am liking it. I put a P-Pumped 12V in an 87 V3500 Chevy. It was about...
With a little bit of work on the pump, you can get way more power than the new cummins make. You can get 400HP and 750-800lb/ft with some simple pump mods on...
Is this a 2 WD one ton truck? Is your trans a 3 speed auto? I am looking to go with a 4X4 and over drive. The Dodge truck I have is a 2 WD 3/4 ton reg cab...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
