I own a 91 comanche, 4cyl., 5speed. When I slow down, like turning into a parking space or making a tight turn, the motor almost goes dead. When I straighten...
not sure about the comanches, but most vehicles with 4 cyl engines are underpowered and causing the power steering pump to work extra (turning, parking, etc.)...
Theres supposed to be an AI motor that adusts the idle automatically, keeps RPM's up between shifts etc anyway its on TBI's but I dont know about MPI's - which...
If its a 91 is should be MPI which means there is a little motor on the side of the throttle body with a plunger on it that controls idle. The butterfly is at...
I am also selling my Jeep Mj. she is a 1992 2 wheel drive sport model with the long box. The truck extierior color is Colorado Red and interior is gray. it...
Does anyone have good links to a long arm build-up, preferably home- made? The 8" short arm kit is OK... but I'm looking for a little more. I already have the...
cant believe im doing this, 88 comanche 3 inch lift full time posi 4.0 5 speed 31x10.5 i have driven this truck across the country 5 times but now i have to...
How much are you askin cwarren1977 <cwarren1977@...> wrote: cant believe im doing this, 88 comanche 3 inch lift full time posi 4.0 5 speed 31x10.5 i have...
I just replaced the head on a 92 XJ 4.0 HO. I spent 200 total that is with a new water pump and all the gaskets and stuff. Plus I took the head over to the...
Looks to me like they covered all the important jazz except one HUGE one [unless I missed it, in which case I humbly appologize]. Theres no way you can lift an...
They want $519 for the 6" lift kit and this is what they say about the control arms "We do have optional items to bump the lift height to 6", though at this...
They want $519 for the 6" lift kit and this is what they say about the control arms "We do have optional items to bump the lift height to 6", though at this...
first off, quick disconnects are a joke. I have my comanche lifted 9.5 inches and it still drives great with no sway bar at all. Transfer case drop? That...
I just put an 8" skyjacker lift in my Comanche.Coils, shocks and quick disconnects. I`m sorry Ron but I think the quick disconnects are great. They really...
adjustable trackbar is almost a necessity. I'm not sure about stock rear driveshaft length because I started out with a 4cyl 2wd truck. I bought a wrecked...
Sweet! I truly wish I could make it. I'm getting tired of the bitter cold. When you get back, you can post up pictures/stories of the adventure at the...
Peter, It was almost 90 here today.. We'll be knocking on 100 before the end of the month.. We did pretty good in Vegas last month, we came in 7th overall in...
hello i am new to this group with a 1986 comanche 2.8 4x4, and does anyone have a wiring diagram to install the tachometer? or know which wires to splice into?...
Im lookin for a dana 30 cairer that will run 4.10 or lower. Swaping from stock to 4.88 And Im trying not to go to the dealer on this. Any help apreicated. ...
Welcome! What you should do is invest in a set of factory manuals asap if you plan to keep your MJ. The price you pay for them will pay for itself quickly....
actually, with the Dana 30, anything above a 3.55 (some call it a 3.54) will work with your gears. 3.55 and below calls for one carrier, 3.73 and above calls...
check car-parts.com and find one that has stock 4.56 gears then build an 8.8 or D44 to match then all you have to do is pay for one end to be set up but if...
Well my stock gears are 3.55, I need the carier for the 3.73. ... Don't be flakey. Get Yahoo! Mail for Mobile and always stay connected to friends. [Non-text...
Are you installing a stock Tach or an aftermarket? Jeep on! --Pete ... asap if ... cluster swap ... signals ... [mailto:jeepcomanche@yahoogroups.com]On...
