It was indeed there, and that was the problem. A $3.00 part at Auto Zone and everything is working properly again. Cheapest fix ever for my Stone! Thanks! --...
taillight fix: I originally though the taillights were neet until i realize what a piece of crap the assembly is. I bought generic metal light bulb sockets at...
The indicators in the original rear set up (the twin bulb type) can be fixed. You drill out the inserts and drill a passage right through. A length of 5mm...
So I have a 2000 Jackal, and one issue that does concern me. As I go down the road, the bike works great. However, in 3rd gear or so (may do it in second or...
Greetings from NJ. Just picked up an '03 Stone with 4,800 miles last week. Already put 970 miles on in the first two days. I've had a '74 Eldo Police for...
i may have one. The one I bought does not fit because I have custom made saddle back mounts that get in the way. i will have to cut it and maybe JB Weld some...
Ron, Is it the HB version with the triangular pad and grab handles? Cam ... back mounts that get in the way. i will have to cut it and maybe JB Weld some...
wow...thought I was the only Jackal/Stone in NJ. Welcome...I'm in Jersey City. Ride mine to work every day on 78. Wave hello sometime. Mike New Jersey USA ... ...
Located in Barcelona, Spain. I am finally to the point of replacing some parts on my bike. I have a matte black Jackal and the rear fender has taken some...
I think Teo Lamers is a good place for used parts in Europe. http://www.tlm.nl/ Don't forget that a California Special Sport or EV fender with taillight might...
Reboot spares specialise in breaking Guzzis, they are in Europe. http://www.rebootguzzispares.com/index.html?mainframe.htm&2 Patrick ... From: Olle Torgny To:...
Thanks to both of you for the information. I will look into their sites and see what is available. Mark ... lights ... taillight might fit also, if you like...
I sourced similar parts from Brembo and believe that I ended up with a better looking and performing result. Lemme know if you'd like a list of parts and the...
It's a bit more than just adding the disc and plumbing, you also need a new master cylinder and lever. I saw the whole kit at a dealers in the UK, it was over...
... need a new master cylinder and lever. ... I am doing the same conversion this weekend. I was lucky enough to find a pair of used calipers and the master ...
... I have been reading this thread and the only question I am left with is why? I have more than enough breaking power in the front to lock my front wheel up...
It is a worthwhile upgrade for those who ride hard, especially in the mountains. While the single disk will indeed lock up the wheel at any speed, it will tend...
I haven't bothered with a second disc on my 2001 Jackal. The only time I felt I needed it was on fast downhill mountain roads, both in the Alps and Scotland. I...
... I'm not sure. My original rotor on the right side measures 3.9mm in thickness, and the used ones I got measure 3.8mm. My bike just turned 16k miles. Send...
Hi all, A while ago I wrote that I was having some problems with my rear shock. I have since swapped the originals to a pair of Wilber's Classic and I must say...
... I have posted pictures of my conversion parts in a folder called "Dual Disc Conversion". Here's a list of the part numbers I used to make the hoses: R4050C...
Hi MG, Billy Joel lives out in Long Island, NY. NJ famous residents are Bon Jovi and Bruce Springsteen. As I am originally for NY and know Mr. Joel to own a...
Mike, Thanks for the correction! I knew Billy lived someplace in the NE and that he rode a Jackal. So maybe Mike does own the only Jackal in NJ!!! Motogeezer ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
