I have about 14,000 on my 2000 Jackal and it is running great. I was thinking about checking my brake pads to see what the wear is. How many miles are people...
... Mark, I had a bit over 30000 when I changed my front pucks, but they were mighty thin, could have done it several thou earlier. My rears are still looking...
I have a 2000 Jackal with a weepy fork seal. I live a fair distance from a Guzzi shop & want to do it myself. I have the seal and dust cover as well as the...
Mark, My rear bit the dust at about 14,000 (as in metal to metal), front still going strong at 15,000+. Strange, because I use my front much more than my rear,...
Ron Kaye
moonshad@...
May 7, 2004 3:42 am
2001
Hello all- Recently my electronic petc0ck died about 50 miles from home. I had to ride home with the fuel pump sucking through the dead fuel tap. Replaced...
Sean while on the issue of replacing fuel pump I seem to recall that another rider found an equivalent pump for a lot less than Guzzi charges. I can not...
Thank you for the replies so far. I did dig up the other compatible fuel pumps (Napa, etc.). When I replaced the old (electronic) petcock, it was rather...
... snipped When I replaced the old (electronic) petcock, it was rather grungy & gritty...and when I replaced the fuel filter this past weekend, there was...
Thanks again, I'll have a peek inside the gas tank. I've used the POR-15 treatment on an Ambassador tank with good results, so I sorta know what to expect...
After riding the UK winter with the big ole Guzzi classic screen, I decided to remove it for a while.... WOW...a total transformation back to the bike I...
That's funny! Meanwhile, I just found out that with my new mini fairing - which is just a few centimeters above the speedo - riding is now much less "windy". I...
No matter what taillight you go for, you will probably have to change the rear fender. If the new taillight can cover the old fittings for the standard...
speaking of tail lights, my right rear turn signal Allen screw plastic housing broke...that is, the plastic part that the yoke tightens into. Net result: my...
Hey Joe, i have the same problem with mine that the previous owner had temporarily fixed with some epoxy. It came loose again this summer for the first time...
... repairs? ... price? ... Call Mark at www.motoguzziclassics.com he must have plenty that he has taken off for "custom" aplications. You can carfully remove...
... When my taillights failed I discovered that the actuator switch on the handlebar had stuck on. The heat generated by the brakelight (I believe that...
i would definitely like to hear how to remove that bracket and avoid repainting the fender. It looks like Im goin to start the fender project this week...
so, I'm kind of an idiot...but anyway, when my Jackal was falling because the kick stand was slipping on wet gravel, I kept it from falling all the way down...
Blombo..I had the same thing happening with my rear light, due to vibration. I would bend the metal clips tighter, then on a night, I would look back and there...
Hi, I have a 2003 Metal which came with some Chrome Forward Controls by Pedane (I think). Does anyone know where I could get the matching rear pegs in the US?...
Woah! remind me not to arm wrestle with you! It's really no problem to just bend it back.. if you can. If it were me, I'd probably take it off the bike, put it...
Hi, try epoxy resin glue. It worked fine on my rear indicators when I knocked them off. ... From: Stephen Dickinson To: jackalownersclub@yahoogroups.com Sent:...
... Are you talking about the black turn signal stalk is broken? Or is it the plastic base that the two signals and tail light all attach to? If it's the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
