Couple of things I forgot to mention, diodes, as those in the R/R, are high resistance one direction, low the other so switch leads/polarity on the meter. It...
Hi Obejuan, ... Aw, jeez. I can't believe I did that. The mind is gone... ... I like it. Terrific idea. ... Hope you aren't freezing up there in the far...
2 of the 4 spark plugs have inserts they go into, one of my oil seals is leaking, i have the seal but where can i find an Allen wrench they size i need for the...
Purchased small trailer with 1200 lb capacity from Harbor Freight for $249. Has steel deck and 12 inch tires. Cut three quarter inch plywood for enlarged deck,...
Lamberto, You can get OEM Honda rotors discounted, about 30%, from Service Honda. I think EBC offers aftermarket rotors but they cost about the same as the...
Subject: Regulators On Tue, 28 Feb 2006 06:31:15 -0800 (PST), Revill Dunn revealed to the universe: (Something strange about wife-swapping and:) "Seems we have...
Can anyone tell me how a straight steering stem supposed to look like? I'm inspecting mine and I notice that the right side is not a mirror image of the left...
Thanks to Sandie Rosenthal (thanks Sandie!), I was able to locate a bracket that I could use to install my Sirius Sportster radio. The bracket is actually for...
ok I got a question what kind of oil do you use ,an weight will any kind of 90w work? or should i use a honda brand, wall mart? does it matter? i think i can...
mike campbell
flexoclt@...
Mar 1, 2006 11:42 pm
62077
If any of you are as annoyed with the inaccuracy of the fuel gauge as I was after purchasing my PC800, you should consider making the adjustment described in...
Is there a color match for the gray dash parts on a 1989? Something I could get at a local parts store maybe. Someone must have spilled clutch fluid and it...
I looked it up at Service Honda and the left rotor for a 1989 through 1996 is $271.49 retail and $179.21 discounted. That is one rotor. Ouch. On eBay is a...
I was looking at the rotors on eBay and I noticed they are "Heat treated carbon steel." Translation: These will rust when they sit. Picture most European...
I am confused. I have read posts stating that the handlebars on the PC are 7/8". I measured the diameter on the stock grip with a caliper and got 1.25". I want...
I have not posted here for a long time -- since I parted with my lovely PC because it was simply too heavy for my bod to conveniently handle. It was a fine...
Hi, Thanks for the report on your trailer. It sounds like a good deal. Is a 4x8-foot trailer long enough for a PC, or does the bike hang over the back once...
I found this site from one of your members when I bought my 89 PC a couple years ago. It was too heavy for me to handle comfortably, and I regrettfully parted...
Jim, The bars on the PC can bee a little confusing. They are 1" at the center where the clamps are and 7/8" at the ends for the grips. Fred ... PC ... and...
I love mine. I do wish they had an easier way to set preload other than disassembly (I have not done it) but so far it has not been a problem going from one...
Anyone have any experience with buying these parts on E-Bay? For example: http://tinyurl.com/grnfv I tinyURLed the link as the E-Bay link looks like this: ...
Just a reminder, the ESRide 2006 is coming up April 22. I have a good number of people on the list already, but there's always room for more Coasters. If you...
I'm contemplating buying a 96 and was wondering what the maximum width is. I don't have a garage and will be keeping the bike indoors and need to know if it...
Hey Jim, The designation for the hand grips is 7/8" diameter. The right grip is larger in diameter because it also has to slip over the throttle twist grip....
Hi, I just replaced my grips and ends...the size is 7/8ths...Aj ... grip is ... twist ... is ... mount ... there ... handlebars. ... the ... caliper...
Hey Mike, I don't know if you got a reply on this one but here goes. This is sort of a "which oil is best" question. Actually there is not nearly as much of...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
