The only real way to get these back to good working order again is to remove the
pistons, rub them clean with brake cleaner, clean
out the recessed area behind the piston seals, replace the piston seals, flush
and refill the braking system, and that should do
it.

Mike Gunderson





------- Original Message -------
From : wcbushey@...[mailto:wcbushey@...]
Sent : 1/13/2009 3:53:10 PM
To : ipcrc@yahoogroups.com
Cc :
Subject : RE: PC800: replaced pads









I just replaced pads, and now the wheel is tight to turn. I cleaned
the

pucks with brake cleaner but there was still some corrosion on them.they

pushed back in ok, but now they don't appear to be releasing as they

should. Will this get better or am I looking at overhauling the

calipers.Thanks in advance.

Chuckie